Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Aluminium roller shutters in Argyll & Bute

We supply, fit and maintain aluminium roller shutters throughout Argyll & Bute: Helensburgh, Oban and Dunoon and the towns in between.

Guide prices for aluminium roller shutters in Argyll & Bute run from £1,195 to £3,595 ex VAT (£1,434 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Scotland
  • 3 towns covered
  • From £1,195 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Choosing aluminium roller shutters for premises in Argyll & Bute

Extruded aluminium laths are solid profiles that are stronger and more resistant to forced entry than roll-formed laths. Foam-filled laths reduce noise and add a little insulation compared with single-skin metal. Aluminium does not rust, so it suits coastal towns and exposed frontages.

Roll-formed aluminium laths are two skins of aluminium with an insulating foam core, which keeps them light. For higher-risk sites, extruded aluminium or galvanised steel is usually preferred to foam-filled laths.

Options we can specify

  • Roll-formed foam-filled or extruded aluminium laths
  • Smaller shutter box than steel
  • Manual or electric operation
  • Powder coated to a RAL colour
  • Solid, perforated or vision laths
  • No rust, suited to coastal and exposed sites
A cut-away of a foam-filled double-skin aluminium shutter lath

Guide prices in Argyll & Bute

Aluminium roller shutters guide prices
OptionEx VATInc VAT
Extruded aluminium shutter, up to 3m wide£1,895 to £3,595£2,274 to £4,314
Insulated aluminium shutter in a RAL colour, up to 3m£1,395 to £2,795£1,674 to £3,354
Foam-filled aluminium shutter, up to 3m wide£1,195 to £2,295£1,434 to £2,754

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Argyll & Bute

We cover Argyll & Bute from Helensburgh to Oban and Dunoon, with 3 towns listed below. Planning decisions for external shutters sit with your local council in Scotland, and we check the position at survey.

Rules in Scotland

Planning permission for shopfront shutters

In Scotland fitting an external security shutter to a shopfront normally needs planning permission from the council, and listed building consent if the building is listed. Councils often ask for the box to be concealed and for open or perforated designs rather than solid shutters in conservation areas.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.

Towns we cover in Argyll & Bute

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Aluminium roller shutters: common questions

Do aluminium shutters corrode by the sea?

Aluminium does not rust like steel, and a powder-coated finish adds protection, which makes it a good choice for coastal frontages.

Will an aluminium shutter dent?

Foam-filled laths can dent under a heavy impact. Extruded aluminium resists denting far better, and damaged laths can be replaced individually.

What is the difference between roll-formed and extruded aluminium?

Roll-formed laths are two thin skins with a foam core, which is light and insulating. Extruded laths are solid profiles, which are heavier and much stronger.

Will you take away my old shutter?

Yes. Removal and disposal of an old shutter is included when we quote for a replacement.

Can I get a quote from photos?

Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.

Other services in Argyll & Bute

See everything we do in Argyll & Bute, or read about aluminium roller shutters.

Get a fixed price in Argyll & Bute

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248