Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Aluminium roller shutters in Lincolnshire

We supply, fit and maintain aluminium roller shutters throughout Lincolnshire: Lincoln, Grimsby and Scunthorpe and the towns in between.

Guide prices for aluminium roller shutters in Lincolnshire run from £1,195 to £3,595 ex VAT (£1,434 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • East Midlands
  • From £1,195 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Aluminium roller shutters in Lincolnshire: the essentials

Extruded aluminium laths are solid profiles that are stronger and more resistant to forced entry than roll-formed laths. For higher-risk sites, extruded aluminium or galvanised steel is usually preferred to foam-filled laths. Perforated aluminium laths are available for frontages where the display needs to stay visible.

Aluminium is the usual choice for domestic shutters and garage roller doors. Foam-filled laths reduce noise and add a little insulation compared with single-skin metal.

Options we can specify

  • Manual or electric operation
  • Smaller shutter box than steel
  • No rust, suited to coastal and exposed sites
  • Solid, perforated or vision laths
  • Quieter running than steel
  • Roll-formed foam-filled or extruded aluminium laths
A cut-away of a foam-filled double-skin aluminium shutter lath

Guide prices in Lincolnshire

Aluminium roller shutters guide prices
OptionEx VATInc VAT
Extruded aluminium shutter, up to 3m wide£1,895 to £3,595£2,274 to £4,314
Insulated aluminium shutter in a RAL colour, up to 3m£1,395 to £2,795£1,674 to £3,354
Foam-filled aluminium shutter, up to 3m wide£1,195 to £2,295£1,434 to £2,754

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Lincolnshire

We cover Lincolnshire from Lincoln to Grimsby, Scunthorpe and Boston, with 10 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Lincolnshire

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Lincolnshire

What is the difference between roll-formed and extruded aluminium?

Roll-formed laths are two thin skins with a foam core, which is light and insulating. Extruded laths are solid profiles, which are heavier and much stronger.

Will an aluminium shutter dent?

Foam-filled laths can dent under a heavy impact. Extruded aluminium resists denting far better, and damaged laths can be replaced individually.

Is aluminium strong enough for a shop?

For most shops and offices, yes, especially extruded aluminium laths. For high-risk premises, galvanised steel or a rated shutter may be recommended.

Do you work with landlords and managing agents?

Yes. We quote, fit and service shutters for landlords, managing agents and facilities teams, including multi-site planned maintenance.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Other services in Lincolnshire

See everything we do in Lincolnshire, or read about aluminium roller shutters.

Get a fixed price in Lincolnshire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248