Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Aluminium roller shutters in Renfrewshire & Inverclyde

We supply, fit and maintain aluminium roller shutters throughout Renfrewshire & Inverclyde: Paisley, Greenock and Newton Mearns and the towns in between.

Guide prices for aluminium roller shutters in Renfrewshire & Inverclyde run from £1,195 to £3,595 ex VAT (£1,434 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Scotland
  • 4 towns covered
  • From £1,195 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Choosing aluminium roller shutters for premises in Renfrewshire & Inverclyde

Aluminium laths take powder coating well, so they can be finished in almost any RAL colour. Foam-filled laths reduce noise and add a little insulation compared with single-skin metal. Aluminium does not rust, so it suits coastal towns and exposed frontages.

For higher-risk sites, extruded aluminium or galvanised steel is usually preferred to foam-filled laths. Perforated aluminium laths are available for frontages where the display needs to stay visible.

Specification options

  • Smaller shutter box than steel
  • No rust, suited to coastal and exposed sites
  • Manual or electric operation
  • Quieter running than steel
  • Solid, perforated or vision laths
  • Lighter curtain for less wear on motors and springs
A cut-away of a foam-filled double-skin aluminium shutter lath

Guide prices in Renfrewshire & Inverclyde

Aluminium roller shutters guide prices
OptionEx VATInc VAT
Extruded aluminium shutter, up to 3m wide£1,895 to £3,595£2,274 to £4,314
Insulated aluminium shutter in a RAL colour, up to 3m£1,395 to £2,795£1,674 to £3,354
Foam-filled aluminium shutter, up to 3m wide£1,195 to £2,295£1,434 to £2,754

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Renfrewshire & Inverclyde

We cover Renfrewshire & Inverclyde from Paisley to Greenock, Newton Mearns and Renfrew, with 4 towns listed below. Planning decisions for external shutters sit with your local council in Scotland, and we check the position at survey.

Rules in Scotland

Planning permission for shopfront shutters

In Scotland fitting an external security shutter to a shopfront normally needs planning permission from the council, and listed building consent if the building is listed. Councils often ask for the box to be concealed and for open or perforated designs rather than solid shutters in conservation areas.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.

Towns we cover in Renfrewshire & Inverclyde

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Renfrewshire & Inverclyde

What is the difference between roll-formed and extruded aluminium?

Roll-formed laths are two thin skins with a foam core, which is light and insulating. Extruded laths are solid profiles, which are heavier and much stronger.

Do aluminium shutters corrode by the sea?

Aluminium does not rust like steel, and a powder-coated finish adds protection, which makes it a good choice for coastal frontages.

Is aluminium strong enough for a shop?

For most shops and offices, yes, especially extruded aluminium laths. For high-risk premises, galvanised steel or a rated shutter may be recommended.

Can you fit outside trading hours?

Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Other services in Renfrewshire & Inverclyde

See everything we do in Renfrewshire & Inverclyde, or read about aluminium roller shutters.

Get a fixed price in Renfrewshire & Inverclyde

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248