Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Aluminium roller shutters in Esher

Looking for aluminium roller shutters in Esher? We survey the opening, price it in writing and fit it, with nothing ordered until you approve the quote.

Guide prices for aluminium roller shutters in Esher run from £1,195 to £3,595 ex VAT (£1,434 to £4,314 inc VAT). Width, operation, lath type and finish make the biggest difference.

  • KT10 and nearby
  • Surrey
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about aluminium roller shutters in Esher

Foam-filled laths reduce noise and add a little insulation compared with single-skin metal. For higher-risk sites, extruded aluminium or galvanised steel is usually preferred to foam-filled laths.

Aluminium is the usual choice for domestic shutters and garage roller doors. Perforated aluminium laths are available for frontages where the display needs to stay visible.

Specification options

  • No rust, suited to coastal and exposed sites
  • Lighter curtain for less wear on motors and springs
  • Smaller shutter box than steel
  • Manual or electric operation
  • Quieter running than steel
  • Solid, perforated or vision laths
A cut-away of a foam-filled double-skin aluminium shutter lath

Guide prices in Esher

Aluminium roller shutters guide prices
OptionEx VATInc VAT
Extruded aluminium shutter, up to 3m wide£1,895 to £3,595£2,274 to £4,314
Insulated aluminium shutter in a RAL colour, up to 3m£1,395 to £2,795£1,674 to £3,354
Foam-filled aluminium shutter, up to 3m wide£1,195 to £2,295£1,434 to £2,754

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Esher and nearby

Esher sits in Surrey, roughly 9 miles from Woking. Whether the job is in the KT10 district or nearby Walton-on-Thames, Hampton and Sunbury-on-Thames, the survey and quote work the same way.

Rules in England

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Questions about aluminium roller shutters in Esher

Do you cover Esher?

Yes. Esher (KT10) is within our Surrey coverage, along with nearby Walton-on-Thames, Hampton and Sunbury-on-Thames.

Is aluminium strong enough for a shop?

For most shops and offices, yes, especially extruded aluminium laths. For high-risk premises, galvanised steel or a rated shutter may be recommended.

Will an aluminium shutter dent?

Foam-filled laths can dent under a heavy impact. Extruded aluminium resists denting far better, and damaged laths can be replaced individually.

What is the difference between roll-formed and extruded aluminium?

Roll-formed laths are two thin skins with a foam core, which is light and insulating. Extruded laths are solid profiles, which are heavier and much stronger.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Also available in Esher

See everything we do in Esher, across Surrey, or read about aluminium roller shutters.

Get a fixed price in Esher

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248