Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248

Electric roller shutters in Larne

Made-to-measure electric roller shutters for shops, homes and businesses in Larne and the wider BT40 area, with a free survey and a fixed price in writing.

In Larne, electric roller shutters typically cost £695 to £4,495 ex VAT (£834 to £5,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • BT40 and nearby
  • County Antrim
  • Northern Ireland

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How electric roller shutters work, and what to ask for

Smart controllers can add app or timer control to many existing motors without replacing the shutter. A tubular motor sits inside the barrel on most shop and domestic shutters, while larger doors use a direct-drive or chain motor on the end plate.

Where people or vehicles pass under the curtain, a safety edge or photocells stop and reverse it if something is in the way. An electrician connects the shutter to a fused spur, and the work is done to BS 7671, the wiring regulations.

Features to choose from

  • Key switch, wall switch, remote fob or timer control
  • Soft start and stop to reduce wear
  • Powder coating to a RAL colour
  • Fused spur connection by a qualified electrician
  • Manual override for power cuts
  • Commissioning and force checks on handover
A hand holding a remote fob beside a wall key switch for an electric roller shutter

Guide prices in Larne

Electric roller shutters guide prices
OptionEx VATInc VAT
Shopfront shutter, 5m and wider£2,395 to £4,495£2,874 to £5,394
Shopfront shutter, opening up to 3m wide£1,495 to £2,795£1,794 to £3,354
Window shutter, opening up to 1.5m wide£695 to £1,395£834 to £1,674

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Larne and nearby

Our engineers travel across County Antrim, including Larne (BT40). We also cover nearby Carrickfergus, Newtownabbey and Bangor (County Down), so jobs at more than one site can be grouped into one visit.

Rules in Northern Ireland

Planning permission for shopfront shutters

In Northern Ireland planning permission for an external shopfront shutter is decided by your local council, which took over most planning decisions in 2015, and a listed building also needs listed building consent. Design guidance generally favours shutters that keep the frontage visible.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Your questions answered

Do you cover Larne?

Yes. Send the postcode and we will arrange a survey in Larne. We also cover nearby Carrickfergus, Newtownabbey and Bangor (County Down).

Do I need a new electrical circuit?

Usually not. Most shutters run from a fused spur near the shutter box. If there is no supply nearby, a new circuit is quoted separately and done by a qualified electrician.

What happens to an electric shutter in a power cut?

Every electric shutter we supply has a manual override, so it can be wound or released by hand until the power returns.

Are safety edges always needed?

Not always. It depends on the risk assessment: who uses the opening, whether people or vehicles pass under it, and how the shutter is controlled. Hold-to-run key switches on a shopfront often need less than an automatic industrial door.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Will you take away my old shutter?

Yes. Removal and disposal of an old shutter is included when we quote for a replacement.

Get a fixed price in Larne

Free survey, made-to-measure shutters and a written quote before any work starts.