Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248

Electric roller shutters in Llanelli

From the SA15 postcode district outwards, we cover Llanelli for electric roller shutters, with planning and power checked at survey.

Expect electric roller shutters in Llanelli to start from £695 ex VAT (£834 inc VAT). Larger openings, insulated or rated laths, colours and motors move the price towards the top of the range.

  • SA15 and nearby
  • Dyfed
  • Wales

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Electric roller shutters in Llanelli: the essentials

Remote fobs, wall switches and timer controls can be combined, so staff can open up from the car or the shutter can close at a set time. A manual override, usually a crank or a release cord, means the shutter can still be opened in a power cut.

Smart controllers can add app or timer control to many existing motors without replacing the shutter. A tubular motor sits inside the barrel on most shop and domestic shutters, while larger doors use a direct-drive or chain motor on the end plate.

Options we can specify

  • Manual override for power cuts
  • Soft start and stop to reduce wear
  • Tubular, direct-drive or chain-drive motors sized to the curtain
  • Optional app or smart-home control
  • Commissioning and force checks on handover
  • Aluminium, steel, perforated or insulated curtains
A hand holding a remote fob beside a wall key switch for an electric roller shutter

Guide prices in Llanelli

Electric roller shutters guide prices
OptionEx VATInc VAT
Shopfront shutter, 5m and wider£2,395 to £4,495£2,874 to £5,394
Shopfront shutter, opening up to 3m wide£1,495 to £2,795£1,794 to £3,354
Window shutter, opening up to 1.5m wide£695 to £1,395£834 to £1,674

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Where we work around Llanelli

We cover Llanelli and the surrounding SA15 district as part of our work across Dyfed, along with nearby Gorseinon, Swansea and Ammanford.

Rules in Wales

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Electric roller shutters: common questions

Do you cover Llanelli?

Yes. We survey, fit and repair electric roller shutters in Llanelli and the SA15 district, as part of our coverage across Dyfed.

Do I need a new electrical circuit?

Usually not. Most shutters run from a fused spur near the shutter box. If there is no supply nearby, a new circuit is quoted separately and done by a qualified electrician.

How long do shutter motors last?

With regular servicing a good tube motor typically lasts many years. Heavy daily use, an overweight curtain or misaligned guides shorten its life, which is why servicing matters.

Are safety edges always needed?

Not always. It depends on the risk assessment: who uses the opening, whether people or vehicles pass under it, and how the shutter is controlled. Hold-to-run key switches on a shopfront often need less than an automatic industrial door.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Get a fixed price in Llanelli

Free survey, made-to-measure shutters and a written quote before any work starts.