Electric roller shutters in South Yorkshire
Electric roller shutters for shops, homes and businesses in South Yorkshire. We work in Sheffield, Rotherham and Doncaster, with prices confirmed in writing before work starts.
Guide prices for electric roller shutters in South Yorkshire run from £695 to £4,495 ex VAT (£834 to £5,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- England
- Yorkshire and the Humber
- From £695 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
What to know about electric roller shutters in South Yorkshire
Remote fobs, wall switches and timer controls can be combined, so staff can open up from the car or the shutter can close at a set time. Where people or vehicles pass under the curtain, a safety edge or photocells stop and reverse it if something is in the way. Key switches are the most common control for shops because only a key holder can open the shutter from outside.
A tubular motor sits inside the barrel on most shop and domestic shutters, while larger doors use a direct-drive or chain motor on the end plate. Motors are sized to the weight of the curtain, so heavy steel or insulated curtains are paired with a stronger drive.
What's included
- Optional app or smart-home control
- Manual override for power cuts
- Soft start and stop to reduce wear
- Commissioning and force checks on handover
- Tubular, direct-drive or chain-drive motors sized to the curtain
- Aluminium, steel, perforated or insulated curtains
Guide prices in South Yorkshire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Shopfront shutter, 5m and wider | £2,395 to £4,495 | £2,874 to £5,394 |
| Shopfront shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Window shutter, opening up to 1.5m wide | £695 to £1,395 | £834 to £1,674 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering South Yorkshire
We cover South Yorkshire from Sheffield to Rotherham, Doncaster and Barnsley, with 5 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Planning permission for shopfront shutters
In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Questions about electric roller shutters in South Yorkshire
Are safety edges always needed?
Not always. It depends on the risk assessment: who uses the opening, whether people or vehicles pass under it, and how the shutter is controlled. Hold-to-run key switches on a shopfront often need less than an automatic industrial door.
Do I need a new electrical circuit?
Usually not. Most shutters run from a fused spur near the shutter box. If there is no supply nearby, a new circuit is quoted separately and done by a qualified electrician.
How long do shutter motors last?
With regular servicing a good tube motor typically lasts many years. Heavy daily use, an overweight curtain or misaligned guides shorten its life, which is why servicing matters.
Can you fit outside trading hours?
Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.
How long does it take from order to fitting?
Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.
Other services in South Yorkshire
- Roller shutter repairs in South Yorkshire
- Roller shutter installation in South Yorkshire
- High-speed doors in South Yorkshire
- Security roller shutters in South Yorkshire
- Manual to electric conversion in South Yorkshire
- Aluminium roller shutters in South Yorkshire
- Shutter motor replacement in South Yorkshire
- LPS 1175 high-security shutters in South Yorkshire
- Retractable security grilles in South Yorkshire
See everything we do in South Yorkshire, or read about electric roller shutters.
Get a fixed price in South Yorkshire
Free survey, made-to-measure shutters and a written quote before any work starts.