Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Dunstable

Need industrial roller shutter doors in Dunstable? We work across Bedfordshire with written prices agreed before any work starts.

In Dunstable, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • LU6 and nearby
  • Bedfordshire
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about industrial roller shutter doors in Dunstable

Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Planned maintenance keeps busy doors running and is part of keeping workplace equipment safe. Wicket doors and vision panels let staff walk through or see outside without opening the full door.

Features to choose from

  • Direct-drive and chain motors for heavy use
  • Push-button, pull-cord, loop or remote control
  • Single or three-phase drives
  • Wicket doors and vision panels
  • Wind locks and deep guide rails
  • Safety edges, photocells and light curtains
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Dunstable

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Where we work around Dunstable

Dunstable sits in Bedfordshire, roughly 5 miles from Luton. Whether the job is in the LU6 district or nearby Leighton Buzzard, Harpenden and Berkhamsted, the survey and quote work the same way.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Questions about industrial roller shutter doors in Dunstable

Do you cover Dunstable?

Yes. Send the postcode and we will arrange a survey in Dunstable. We also cover nearby Leighton Buzzard, Harpenden and Berkhamsted.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

Is the survey free?

Yes, for new shutters, grilles and doors: the survey and written quote are free and there is no obligation to go ahead. Repair and servicing visits are charged, and we tell you the price before we visit.

Can I get a quote from photos?

Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.

More shutter services near you

See everything we do in Dunstable, across Bedfordshire, or read about industrial roller shutter doors.

Get a fixed price in Dunstable

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248