Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in St Neots

Industrial roller shutter doors for warehouses, factories and workshops in St Neots, Cambridgeshire. Send a postcode and rough size for a guide price.

In St Neots, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • PE19 and nearby
  • Cambridgeshire
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Wicket doors and vision panels let staff walk through or see outside without opening the full door.

Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

What's included

  • Safety edges, photocells and light curtains
  • Single or three-phase drives
  • Guide guards and bollards against impact
  • Wind locks and deep guide rails
  • Galvanised steel or insulated laths
  • Push-button, pull-cord, loop or remote control
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in St Neots

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

St Neots and surrounding towns

We cover St Neots and the surrounding PE19 district as part of our work across Cambridgeshire. St Neots is around 25 miles from Peterborough, and we also cover nearby Huntingdon, Bedford and Rushden.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Questions about industrial roller shutter doors in St Neots

Do you cover St Neots?

Yes. Send the postcode and we will arrange a survey in St Neots. We also cover nearby Huntingdon, Bedford and Rushden.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Other services in St Neots

See everything we do in St Neots, across Cambridgeshire, or read about industrial roller shutter doors.

Get a fixed price in St Neots

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248