Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Flint

Get a fixed-price quote for industrial roller shutter doors in Flint. Free survey, made-to-measure products and a proper handover.

In Flint, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • CH6 and nearby
  • Clwyd
  • Wales
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Industrial roller shutter doors in Flint: the essentials

Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Timers, induction loops and push-button stations can be added for busy loading bays. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Features to choose from

  • Wind locks and deep guide rails
  • Direct-drive and chain motors for heavy use
  • Push-button, pull-cord, loop or remote control
  • Single or three-phase drives
  • Galvanised steel or insulated laths
  • Wicket doors and vision panels
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Flint

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Where we work around Flint

Flint sits in Clwyd, roughly 15 miles from Wrexham. Whether the job is in the CH6 district or nearby Deeside, Buckley and Hawarden, the survey and quote work the same way.

Rules in Wales

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Questions about industrial roller shutter doors in Flint

Do you cover Flint?

Yes. Flint (CH6) is within our Clwyd coverage, along with nearby Deeside, Buckley and Hawarden.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

Other services in Flint

See everything we do in Flint, across Clwyd, or read about industrial roller shutter doors.

Get a fixed price in Flint

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248