Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in County Durham

We supply, fit and maintain industrial roller shutter doors throughout County Durham: Darlington, Hartlepool and Stockton-on-Tees and the towns in between.

Guide prices for industrial roller shutter doors in County Durham run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • North East
  • From £2,495 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Choosing industrial roller shutter doors for premises in County Durham

Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Safety edges, photocells and light curtains protect people and forklifts passing under the door.

Bump protection, bollards and guide-rail guards reduce damage from vehicles. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Specification options

  • Direct-drive and chain motors for heavy use
  • Wind locks and deep guide rails
  • Push-button, pull-cord, loop or remote control
  • Safety edges, photocells and light curtains
  • Galvanised steel or insulated laths
  • Single or three-phase drives
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in County Durham

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering County Durham

We cover County Durham from Darlington to Hartlepool, Stockton-on-Tees and Durham, with 12 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in County Durham

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Questions about industrial roller shutter doors in County Durham

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Other services in County Durham

See everything we do in County Durham, or read about industrial roller shutter doors.

Get a fixed price in County Durham

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248