Industrial roller shutter doors in Cumbria
Industrial roller shutter doors across Cumbria, including Carlisle, Barrow-in-Furness and Kendal. Free survey, fixed written price and made-to-measure products.
Guide prices for industrial roller shutter doors in Cumbria run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- England
- North West
- From £2,495 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
What to know about industrial roller shutter doors in Cumbria
Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Wicket doors and vision panels let staff walk through or see outside without opening the full door. Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds.
Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Timers, induction loops and push-button stations can be added for busy loading bays.
Options we can specify
- Wicket doors and vision panels
- Push-button, pull-cord, loop or remote control
- Single or three-phase drives
- Direct-drive and chain motors for heavy use
- Safety edges, photocells and light curtains
- Galvanised steel or insulated laths
Guide prices in Cumbria
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Cumbria
We cover Cumbria from Carlisle to Barrow-in-Furness, Kendal and Whitehaven, with 5 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Industrial roller shutter doors: common questions
What safety devices are required?
It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.
How often should an industrial door be serviced?
Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.
Do industrial doors need a three-phase supply?
Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.
How long does it take from order to fitting?
Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.
Who carries out the work?
Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.
Other services in Cumbria
- Fire shutters in Cumbria
- Fire shutter servicing & drop tests in Cumbria
- Roller shutter repairs in Cumbria
- Retractable security grilles in Cumbria
- Counter & hatch shutters in Cumbria
- Roller shutter installation in Cumbria
- High-speed doors in Cumbria
- Manual to electric conversion in Cumbria
- Shutter servicing & maintenance in Cumbria
See everything we do in Cumbria, or read about industrial roller shutter doors.
Get a fixed price in Cumbria
Free survey, made-to-measure shutters and a written quote before any work starts.