Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Long Eaton

Industrial roller shutter doors in Long Eaton: tell us the opening size and postcode and we will send a guide price, then survey for a fixed quote.

In Long Eaton, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • NG10 and nearby
  • Derbyshire
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Bump protection, bollards and guide-rail guards reduce damage from vehicles. Safety edges, photocells and light curtains protect people and forklifts passing under the door.

What's included

  • Single or three-phase drives
  • Safety edges, photocells and light curtains
  • Wicket doors and vision panels
  • Wind locks and deep guide rails
  • Guide guards and bollards against impact
  • Direct-drive and chain motors for heavy use
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Long Eaton

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Long Eaton and surrounding towns

Jobs in Long Eaton are planned as part of our Derbyshire coverage, and visits can be combined with jobs in nearby Ilkeston, Nottingham and West Bridgford. Planning rules are those of your local council in England.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Questions about industrial roller shutter doors in Long Eaton

Do you cover Long Eaton?

Yes. Send the postcode and we will arrange a survey in Long Eaton. We also cover nearby Ilkeston, Nottingham and West Bridgford.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

What details help you quote quickly?

The postcode, the approximate width and height of the opening, whether you want manual or electric operation, and a photo of the frontage.

Also available in Long Eaton

See everything we do in Long Eaton, across Derbyshire, or read about industrial roller shutter doors.

Get a fixed price in Long Eaton

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248