Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Seaford

Industrial roller shutter doors for warehouses, factories and workshops in Seaford, East Sussex. Send a postcode and rough size for a guide price.

In Seaford, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • BN25 and nearby
  • East Sussex
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about industrial roller shutter doors in Seaford

Timers, induction loops and push-button stations can be added for busy loading bays. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.

Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Safety edges, photocells and light curtains protect people and forklifts passing under the door.

What's included

  • Wind locks and deep guide rails
  • Wicket doors and vision panels
  • Single or three-phase drives
  • Push-button, pull-cord, loop or remote control
  • Direct-drive and chain motors for heavy use
  • Galvanised steel or insulated laths
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Seaford

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Seaford and nearby

We cover Seaford and the surrounding BN25 district as part of our work across East Sussex. Seaford is around 11 miles from Brighton, and we also cover nearby Eastbourne, Hailsham and Hove.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Before you book in Seaford

Do you cover Seaford?

Yes. Send the postcode and we will arrange a survey in Seaford. We also cover nearby Eastbourne, Hailsham and Hove.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Also available in Seaford

See everything we do in Seaford, across East Sussex, or read about industrial roller shutter doors.

Get a fixed price in Seaford

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248