Industrial roller shutter doors in Kirkcaldy
We supply, fit and look after industrial roller shutter doors in Kirkcaldy and nearby Glenrothes, Edinburgh and Musselburgh, from a single opening to a whole site.
In Kirkcaldy, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.
- KY1 and nearby
- Fife
- Scotland
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
How industrial roller shutter doors work, and what to ask for
Safety edges, photocells and light curtains protect people and forklifts passing under the door. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.
Timers, induction loops and push-button stations can be added for busy loading bays. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.
Options we can specify
- Single or three-phase drives
- Safety edges, photocells and light curtains
- Guide guards and bollards against impact
- Wicket doors and vision panels
- Wind locks and deep guide rails
- Direct-drive and chain motors for heavy use

Guide prices in Kirkcaldy
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Kirkcaldy and nearby
Kirkcaldy sits in Fife, roughly 12 miles from Dunfermline. Whether the job is in the KY1 district or nearby Glenrothes, Edinburgh and Musselburgh, the survey and quote work the same way.
Rules in Scotland
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.
How it works
Tell us about the opening
Send the postcode, a rough size and a photo if you have one, using the form or a call.
Free survey
We measure, check the structure, power supply and planning position, and talk through options.
Written fixed price
You get a written quote with the product, finish, controls and price before anything is ordered.
Made, fitted and handed over
The shutter is made to measure, fitted, commissioned and handed over with its documents.
Before you book in Kirkcaldy
Do you cover Kirkcaldy?
Yes. Kirkcaldy (KY1) is within our Fife coverage, along with nearby Glenrothes, Edinburgh and Musselburgh.
What safety devices are required?
It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.
Do industrial doors need a three-phase supply?
Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.
How often should an industrial door be serviced?
Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.
Can you fit outside trading hours?
Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.
Will you take away my old shutter?
Yes. Removal and disposal of an old shutter is included when we quote for a replacement.
Also available in Kirkcaldy
- High-speed doors in Kirkcaldy
- Shutter replacement in Kirkcaldy
- Shutter motor replacement in Kirkcaldy
- LPS 1175 high-security shutters in Kirkcaldy
- Security roller shutters in Kirkcaldy
- Shop front shutters in Kirkcaldy
See everything we do in Kirkcaldy, across Fife, or read about industrial roller shutter doors.
Get a fixed price in Kirkcaldy
Free survey, made-to-measure shutters and a written quote before any work starts.
