Industrial roller shutter doors in Newport
Looking for industrial roller shutter doors in Newport? We survey the opening, price it in writing and fit it, with nothing ordered until you approve the quote.
In Newport, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.
- NP10 and nearby
- Gwent
- Wales
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
How industrial roller shutter doors work, and what to ask for
Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Bump protection, bollards and guide-rail guards reduce damage from vehicles.
Wicket doors and vision panels let staff walk through or see outside without opening the full door. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.
What's included
- Wicket doors and vision panels
- Single or three-phase drives
- Guide guards and bollards against impact
- Direct-drive and chain motors for heavy use
- Push-button, pull-cord, loop or remote control
- Galvanised steel or insulated laths
Guide prices in Newport
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Where we work around Newport
We cover Newport, the NP10 district and nearby Risca, Cwmbran and Pontypool, as part of our Gwent coverage.
Rules in Wales
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Industrial roller shutter doors: common questions
Do you cover Newport?
Yes. Newport (NP10) is within our Gwent coverage, along with nearby Risca, Cwmbran and Pontypool.
What safety devices are required?
It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.
Can you replace just the motor on an old door?
Often yes, if the curtain and barrel are sound. See our motor replacement service.
Do industrial doors need a three-phase supply?
Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
More shutter services near you
- Steel roller shutters in Newport
- Shutter motor replacement in Newport
- Counter & hatch shutters in Newport
- Roller shutter installation in Newport
- Home security shutters in Newport
- Shutter servicing & maintenance in Newport
See everything we do in Newport, across Gwent, or read about industrial roller shutter doors.
Get a fixed price in Newport
Free survey, made-to-measure shutters and a written quote before any work starts.