Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Herefordshire

We supply, fit and maintain industrial roller shutter doors throughout Herefordshire: Hereford, Leominster and Ross-on-Wye and the towns in between.

Guide prices for industrial roller shutter doors in Herefordshire run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • West Midlands
  • From £2,495 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Safety edges, photocells and light curtains protect people and forklifts passing under the door. Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds.

Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.

Specification options

  • Single or three-phase drives
  • Galvanised steel or insulated laths
  • Safety edges, photocells and light curtains
  • Guide guards and bollards against impact
  • Push-button, pull-cord, loop or remote control
  • Wicket doors and vision panels
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Herefordshire

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Herefordshire

We cover Herefordshire from Hereford to Leominster and Ross-on-Wye, with 3 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Herefordshire

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Questions about industrial roller shutter doors in Herefordshire

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Other services in Herefordshire

See everything we do in Herefordshire, or read about industrial roller shutter doors.

Get a fixed price in Herefordshire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248