Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in North Yorkshire

We supply, fit and maintain industrial roller shutter doors throughout North Yorkshire: York, Middlesbrough and Harrogate and the towns in between.

Guide prices for industrial roller shutter doors in North Yorkshire run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • Yorkshire and the Humber
  • From £2,495 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Insulated laths reduce heat loss at loading bays and help temperature-controlled stock. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds. Planned maintenance keeps busy doors running and is part of keeping workplace equipment safe.

Features to choose from

  • Guide guards and bollards against impact
  • Direct-drive and chain motors for heavy use
  • Push-button, pull-cord, loop or remote control
  • Safety edges, photocells and light curtains
  • Wind locks and deep guide rails
  • Single or three-phase drives
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in North Yorkshire

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering North Yorkshire

We cover North Yorkshire from York to Middlesbrough, Harrogate and Scarborough, with 7 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in North Yorkshire

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Industrial roller shutter doors: common questions

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Will you take away my old shutter?

Yes. Removal and disposal of an old shutter is included when we quote for a replacement.

Other services in North Yorkshire

See everything we do in North Yorkshire, or read about industrial roller shutter doors.

Get a fixed price in North Yorkshire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248