Industrial roller shutter doors in Hexham
Get a fixed-price quote for industrial roller shutter doors in Hexham. Free survey, made-to-measure products and a proper handover.
Guide prices for industrial roller shutter doors in Hexham run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT). Width, operation, lath type and finish make the biggest difference.
- NE46 and nearby
- Northumberland
- England
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Choosing industrial roller shutter doors for premises in Hexham
Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Timers, induction loops and push-button stations can be added for busy loading bays.
Wicket doors and vision panels let staff walk through or see outside without opening the full door. Planned maintenance keeps busy doors running and is part of keeping workplace equipment safe.
Features to choose from
- Wicket doors and vision panels
- Wind locks and deep guide rails
- Guide guards and bollards against impact
- Push-button, pull-cord, loop or remote control
- Safety edges, photocells and light curtains
- Single or three-phase drives

Guide prices in Hexham
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Where we work around Hexham
If your premises are in Hexham or nearby Consett, Stanley and Newcastle upon Tyne, we can survey and quote. Give us the full postcode, in or around NE46, and we will arrange a time.
Rules in England
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Your questions answered
Do you cover Hexham?
Yes. Hexham (NE46) is within our Northumberland coverage, along with nearby Consett, Stanley and Newcastle upon Tyne.
Do industrial doors need a three-phase supply?
Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.
Can you replace just the motor on an old door?
Often yes, if the curtain and barrel are sound. See our motor replacement service.
How often should an industrial door be serviced?
Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.
Can I get a quote from photos?
Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
Also available in Hexham
- Counter & hatch shutters in Hexham
- Security roller shutters in Hexham
- Aluminium roller shutters in Hexham
- Steel roller shutters in Hexham
- Manual roller shutters in Hexham
- Roller shutter repairs in Hexham
See everything we do in Hexham, across Northumberland, or read about industrial roller shutter doors.
Get a fixed price in Hexham
Free survey, made-to-measure shutters and a written quote before any work starts.
