Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248

Industrial roller shutter doors in Newark-on-Trent

From the NG24 postcode district outwards, we cover Newark-on-Trent for industrial roller shutter doors, with planning and power checked at survey.

Expect industrial roller shutter doors in Newark-on-Trent to start from £2,495 ex VAT (£2,994 inc VAT). Larger openings, insulated or rated laths, colours and motors move the price towards the top of the range.

  • NG24 and nearby
  • Nottinghamshire
  • England

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about industrial roller shutter doors in Newark-on-Trent

Bump protection, bollards and guide-rail guards reduce damage from vehicles. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Safety edges, photocells and light curtains protect people and forklifts passing under the door. Wicket doors and vision panels let staff walk through or see outside without opening the full door.

Specification options

  • Wicket doors and vision panels
  • Safety edges, photocells and light curtains
  • Direct-drive and chain motors for heavy use
  • Single or three-phase drives
  • Guide guards and bollards against impact
  • Galvanised steel or insulated laths
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Newark-on-Trent

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Newark-on-Trent and nearby

If your premises are in Newark-on-Trent or nearby Grantham, Arnold and West Bridgford, we can survey and quote. Give us the full postcode, in or around NG24, and we will arrange a time.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Newark-on-Trent

Do you cover Newark-on-Trent?

Yes. Send the postcode and we will arrange a survey in Newark-on-Trent. We also cover nearby Grantham, Arnold and West Bridgford.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

What warranty do I get?

Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Get a fixed price in Newark-on-Trent

Free survey, made-to-measure shutters and a written quote before any work starts.