Industrial roller shutter doors in Renfrew
Industrial roller shutter doors in Renfrew: tell us the opening size and postcode and we will send a guide price, then survey for a fixed quote.
Expect industrial roller shutter doors in Renfrew to start from £2,495 ex VAT (£2,994 inc VAT). Larger openings, insulated or rated laths, colours and motors move the price towards the top of the range.
- PA4 and nearby
- Renfrewshire & Inverclyde
- Scotland
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Industrial roller shutter doors in Renfrew: the essentials
Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.
Safety edges, photocells and light curtains protect people and forklifts passing under the door. Bump protection, bollards and guide-rail guards reduce damage from vehicles.
What's included
- Galvanised steel or insulated laths
- Direct-drive and chain motors for heavy use
- Wind locks and deep guide rails
- Single or three-phase drives
- Guide guards and bollards against impact
- Wicket doors and vision panels

Guide prices in Renfrew
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Renfrew and nearby
Our engineers travel across Renfrewshire & Inverclyde, including Renfrew (PA4). We also cover nearby Clydebank, Bearsden and Glasgow, so jobs at more than one site can be grouped into one visit.
Rules in Scotland
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Your questions answered
Do you cover Renfrew?
Yes. We survey, fit and repair industrial roller shutter doors in Renfrew and the PA4 district, as part of our coverage across Renfrewshire & Inverclyde.
Do industrial doors need a three-phase supply?
Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.
Can you replace just the motor on an old door?
Often yes, if the curtain and barrel are sound. See our motor replacement service.
What safety devices are required?
It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.
Is the survey free?
Yes, for new shutters, grilles and doors: the survey and written quote are free and there is no obligation to go ahead. Repair and servicing visits are charged, and we tell you the price before we visit.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
Other services in Renfrew
- Garage roller doors in Renfrew
- Roller shutter installation in Renfrew
- Aluminium roller shutters in Renfrew
- Counter & hatch shutters in Renfrew
- Shutter servicing & maintenance in Renfrew
- Manual to electric conversion in Renfrew
See everything we do in Renfrew, across Renfrewshire & Inverclyde, or read about industrial roller shutter doors.
Get a fixed price in Renfrew
Free survey, made-to-measure shutters and a written quote before any work starts.
