Industrial roller shutter doors in Telford
Industrial roller shutter doors in Telford: tell us the opening size and postcode and we will send a guide price, then survey for a fixed quote.
Expect industrial roller shutter doors in Telford to start from £2,495 ex VAT (£2,994 inc VAT). Larger openings, insulated or rated laths, colours and motors move the price towards the top of the range.
- TF3 and nearby
- Shropshire
- England
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Choosing industrial roller shutter doors for premises in Telford
Timers, induction loops and push-button stations can be added for busy loading bays. Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds.
Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Planned maintenance keeps busy doors running and is part of keeping workplace equipment safe.
Specification options
- Single or three-phase drives
- Push-button, pull-cord, loop or remote control
- Wicket doors and vision panels
- Galvanised steel or insulated laths
- Direct-drive and chain motors for heavy use
- Safety edges, photocells and light curtains
Guide prices in Telford
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Telford and surrounding towns
We cover Telford and the surrounding TF3 district as part of our work across Shropshire, along with nearby Wellington (Shropshire), Shrewsbury and Wolverhampton.
Rules in England
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Questions about industrial roller shutter doors in Telford
Do you cover Telford?
Yes. Send the postcode and we will arrange a survey in Telford. We also cover nearby Wellington (Shropshire), Shrewsbury and Wolverhampton.
Can you replace just the motor on an old door?
Often yes, if the curtain and barrel are sound. See our motor replacement service.
Do industrial doors need a three-phase supply?
Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.
Can you fit a door with a pedestrian door in it?
Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
Also available in Telford
- Counter & hatch shutters in Telford
- Roller grilles in Telford
- High-speed doors in Telford
- Shutter replacement in Telford
- Shutter motor replacement in Telford
- Shop front shutters in Telford
See everything we do in Telford, across Shropshire, or read about industrial roller shutter doors.
Get a fixed price in Telford
Free survey, made-to-measure shutters and a written quote before any work starts.