Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Nailsea

From the BS48 postcode district outwards, we cover Nailsea for industrial roller shutter doors, with planning and power checked at survey.

In Nailsea, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • BS48 and nearby
  • Somerset
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Choosing industrial roller shutter doors for premises in Nailsea

Safety edges, photocells and light curtains protect people and forklifts passing under the door. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.

Options we can specify

  • Galvanised steel or insulated laths
  • Safety edges, photocells and light curtains
  • Wind locks and deep guide rails
  • Single or three-phase drives
  • Direct-drive and chain motors for heavy use
  • Guide guards and bollards against impact
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Nailsea

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Where we work around Nailsea

If your premises are in Nailsea or nearby Portishead, Clevedon and Bristol, we can survey and quote. Give us the full postcode, in or around BS48, and we will arrange a time.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Industrial roller shutter doors: common questions

Do you cover Nailsea?

Yes. Nailsea (BS48) is within our Somerset coverage, along with nearby Portishead, Clevedon and Bristol.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Other services in Nailsea

See everything we do in Nailsea, across Somerset, or read about industrial roller shutter doors.

Get a fixed price in Nailsea

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248