Industrial roller shutter doors in Staffordshire
Need industrial roller shutter doors in Staffordshire? We cover Stoke-on-Trent, Newcastle-under-Lyme and Burton upon Trent and the rest of the area, with planning and power checked at survey.
Guide prices for industrial roller shutter doors in Staffordshire run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- England
- West Midlands
- From £2,495 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Industrial roller shutter doors in Staffordshire: the essentials
Bump protection, bollards and guide-rail guards reduce damage from vehicles. Safety edges, photocells and light curtains protect people and forklifts passing under the door. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.
Timers, induction loops and push-button stations can be added for busy loading bays. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.
Options we can specify
- Direct-drive and chain motors for heavy use
- Galvanised steel or insulated laths
- Push-button, pull-cord, loop or remote control
- Wicket doors and vision panels
- Guide guards and bollards against impact
- Wind locks and deep guide rails
Guide prices in Staffordshire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Staffordshire
We cover Staffordshire from Stoke-on-Trent to Newcastle-under-Lyme, Burton upon Trent and Cannock, with 11 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Staffordshire
- Industrial roller shutter doors in Stoke-on-Trent
- Industrial roller shutter doors in Newcastle-under-Lyme
- Industrial roller shutter doors in Burton upon Trent
- Industrial roller shutter doors in Cannock
- Industrial roller shutter doors in Tamworth
- Industrial roller shutter doors in Stafford
- Industrial roller shutter doors in Lichfield
- Industrial roller shutter doors in Kidsgrove
- Industrial roller shutter doors in Burntwood
- Industrial roller shutter doors in Longton
- Industrial roller shutter doors in Rugeley
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Before you book in Staffordshire
Can you fit a door with a pedestrian door in it?
Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.
How often should an industrial door be serviced?
Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.
What safety devices are required?
It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.
Can I get a quote from photos?
Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.
Who carries out the work?
Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.
Other services in Staffordshire
- Aluminium roller shutters in Staffordshire
- Garage roller doors in Staffordshire
- Shutter servicing & maintenance in Staffordshire
- Perforated & punched shutters in Staffordshire
- LPS 1175 high-security shutters in Staffordshire
- Steel roller shutters in Staffordshire
- Fire shutters in Staffordshire
- Insulated roller shutters in Staffordshire
- Fire shutter servicing & drop tests in Staffordshire
See everything we do in Staffordshire, or read about industrial roller shutter doors.
Get a fixed price in Staffordshire
Free survey, made-to-measure shutters and a written quote before any work starts.