Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Esher

Industrial roller shutter doors for warehouses, factories and workshops in Esher, Surrey. Send a postcode and rough size for a guide price.

In Esher, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • KT10 and nearby
  • Surrey
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Insulated laths reduce heat loss at loading bays and help temperature-controlled stock. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Wicket doors and vision panels let staff walk through or see outside without opening the full door. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.

What's included

  • Guide guards and bollards against impact
  • Push-button, pull-cord, loop or remote control
  • Direct-drive and chain motors for heavy use
  • Safety edges, photocells and light curtains
  • Single or three-phase drives
  • Wind locks and deep guide rails
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Esher

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Esher and surrounding towns

For Esher and the KT10 postcode district we survey, supply, fit and repair. Woking is about 9 miles away, and we also cover nearby Walton-on-Thames, Hampton and Sunbury-on-Thames.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Industrial roller shutter doors: common questions

Do you cover Esher?

Yes. We survey, fit and repair industrial roller shutter doors in Esher and the KT10 district, as part of our coverage across Surrey.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Can you fit outside trading hours?

Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.

More shutter services near you

See everything we do in Esher, across Surrey, or read about industrial roller shutter doors.

Get a fixed price in Esher

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248