Industrial roller shutter doors in Tyne and Wear
We supply, fit and maintain industrial roller shutter doors throughout Tyne and Wear: Newcastle upon Tyne, Sunderland and South Shields and the towns in between.
Guide prices for industrial roller shutter doors in Tyne and Wear run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- England
- North East
- From £2,495 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Industrial roller shutter doors in Tyne and Wear: the essentials
Wicket doors and vision panels let staff walk through or see outside without opening the full door. Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Insulated laths reduce heat loss at loading bays and help temperature-controlled stock.
Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.
Features to choose from
- Single or three-phase drives
- Guide guards and bollards against impact
- Wind locks and deep guide rails
- Wicket doors and vision panels
- Push-button, pull-cord, loop or remote control
- Galvanised steel or insulated laths
Guide prices in Tyne and Wear
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Large warehouse door, 6m and over | £5,995 to £11,995 | £7,194 to £14,394 |
| Loading bay door 4m to 6m wide | £4,495 to £8,995 | £5,394 to £10,794 |
| Industrial door up to 4m x 4m, electric | £2,495 to £5,995 | £2,994 to £7,194 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Tyne and Wear
We cover Tyne and Wear from Newcastle upon Tyne to Sunderland, South Shields and Gateshead, with 12 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Tyne and Wear
- Industrial roller shutter doors in Newcastle upon Tyne
- Industrial roller shutter doors in Sunderland
- Industrial roller shutter doors in South Shields
- Industrial roller shutter doors in Gateshead
- Industrial roller shutter doors in Washington
- Industrial roller shutter doors in Tynemouth
- Industrial roller shutter doors in Wallsend
- Industrial roller shutter doors in North Shields
- Industrial roller shutter doors in Whitley Bay
- Industrial roller shutter doors in Houghton-le-Spring
- Industrial roller shutter doors in Jarrow
- Industrial roller shutter doors in Hebburn
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Industrial roller shutter doors: common questions
What safety devices are required?
It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.
Can you fit a door with a pedestrian door in it?
Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.
Can you replace just the motor on an old door?
Often yes, if the curtain and barrel are sound. See our motor replacement service.
Do you work with landlords and managing agents?
Yes. We quote, fit and service shutters for landlords, managing agents and facilities teams, including multi-site planned maintenance.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Other services in Tyne and Wear
- High-speed doors in Tyne and Wear
- Security roller shutters in Tyne and Wear
- Roller grilles in Tyne and Wear
- Electric roller shutters in Tyne and Wear
- Insulated roller shutters in Tyne and Wear
- Roller shutter installation in Tyne and Wear
- Roller shutter repairs in Tyne and Wear
- Shutter motor replacement in Tyne and Wear
- Counter & hatch shutters in Tyne and Wear
See everything we do in Tyne and Wear, or read about industrial roller shutter doors.
Get a fixed price in Tyne and Wear
Free survey, made-to-measure shutters and a written quote before any work starts.