Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Ossett

Get a fixed-price quote for industrial roller shutter doors in Ossett. Free survey, made-to-measure products and a proper handover.

Guide prices for industrial roller shutter doors in Ossett run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT). Width, operation, lath type and finish make the biggest difference.

  • WF5 and nearby
  • West Yorkshire
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Timers, induction loops and push-button stations can be added for busy loading bays.

What's included

  • Wicket doors and vision panels
  • Direct-drive and chain motors for heavy use
  • Safety edges, photocells and light curtains
  • Wind locks and deep guide rails
  • Guide guards and bollards against impact
  • Push-button, pull-cord, loop or remote control
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Ossett

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Ossett and nearby

If your premises are in Ossett or nearby Dewsbury, Batley and Wakefield, we can survey and quote. Give us the full postcode, in or around WF5, and we will arrange a time.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Questions about industrial roller shutter doors in Ossett

Do you cover Ossett?

Yes. Ossett (WF5) is within our West Yorkshire coverage, along with nearby Dewsbury, Batley and Wakefield.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

What details help you quote quickly?

The postcode, the approximate width and height of the opening, whether you want manual or electric operation, and a photo of the frontage.

More shutter services near you

See everything we do in Ossett, across West Yorkshire, or read about industrial roller shutter doors.

Get a fixed price in Ossett

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248