Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

LPS 1175 high-security shutters in Perth & Kinross

Need LPS 1175 high-security shutters in Perth & Kinross? We cover Perth and Crieff and the rest of the area, with planning and power checked at survey.

Guide prices for LPS 1175 high-security shutters in Perth & Kinross run from £2,795 to £8,495 ex VAT (£3,354 to £10,194 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Scotland
  • 2 towns covered
  • From £2,795 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

LPS 1175 high-security shutters in Perth & Kinross: the essentials

Issue 8 ratings combine a letter for the tools and attackers tested against with a number for the minimum delay in minutes, such as B3 or C5. LPS 1175 is a security standard from the Loss Prevention Certification Board, part of BRE. Your insurer may name a minimum rating in your policy, so check the schedule before choosing a product.

Where the structure around the opening is weak, it may need strengthening for the rating to mean anything in practice. Older Issue 7 ratings ran from SR1 to SR8; roughly, SR1 corresponds to A1, SR2 to B3 and SR3 to C5.

Options we can specify

  • Certificate reference provided with your quote
  • Electric operation with override
  • Ratings from A1 upwards to suit the risk
  • Reinforced guides, curtain and locking
  • Structural fixing checked at survey
  • Installed as tested to keep the rating valid
A heavy steel security shutter closed over a stone-faced commercial entrance at night

Guide prices in Perth & Kinross

LPS 1175 high-security shutters guide prices
OptionEx VATInc VAT
D10 and above, or wider openingsAfter surveyAfter survey
C5 rated shutter, up to 3m wide£4,495 to £8,495£5,394 to £10,194
A1 or B3 rated shutter, up to 3m wide£2,795 to £5,495£3,354 to £6,594

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Perth & Kinross

We cover Perth & Kinross from Perth to Crieff, with 2 towns listed below. Planning decisions for external shutters sit with your local council in Scotland, and we check the position at survey.

Rules in Scotland

Rated security products

LPS 1175 certification belongs to the manufacturer's tested product. We give you the certificate reference with your quote and install the shutter to the tested specification. We do not hold or claim certification ourselves.

Planning permission for shopfront shutters

In Scotland fitting an external security shutter to a shopfront normally needs planning permission from the council, and listed building consent if the building is listed. Councils often ask for the box to be concealed and for open or perforated designs rather than solid shutters in conservation areas.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.

Towns we cover in Perth & Kinross

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

LPS 1175 high-security shutters: common questions

Is SR2 the same as B3?

The two systems are different, but as a rough guide SR1 corresponds to A1, SR2 to B3 and SR3 to C5. Your insurer's wording tells you which version they require.

Does my insurer need a rated shutter?

Some policies specify a minimum rating for certain trades or stock values. Check your policy schedule, or send it to us and we will match the product to it.

What does an LPS 1175 rating like B3 mean?

In Issue 8, the letter is the threat level, meaning the tools and number of attackers the product was tested against, and the number is the minimum delay in minutes. B3 means threat level B with at least three minutes' delay.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Will you take away my old shutter?

Yes. Removal and disposal of an old shutter is included when we quote for a replacement.

Other services in Perth & Kinross

See everything we do in Perth & Kinross, or read about LPS 1175 high-security shutters.

Get a fixed price in Perth & Kinross

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248