Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

LPS 1175 high-security shutters in Worcestershire

LPS 1175 high-security shutters across Worcestershire, including Worcester, Redditch and Kidderminster. Free survey, fixed written price and made-to-measure products.

Guide prices for LPS 1175 high-security shutters in Worcestershire run from £2,795 to £8,495 ex VAT (£3,354 to £10,194 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • West Midlands
  • From £2,795 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How LPS 1175 high-security shutters work, and what to ask for

Older Issue 7 ratings ran from SR1 to SR8; roughly, SR1 corresponds to A1, SR2 to B3 and SR3 to C5. LPS 1175 is a security standard from the Loss Prevention Certification Board, part of BRE. The LPCB publishes a list of certified products, called the Red Book, so a rating can be checked independently.

Issue 8 ratings combine a letter for the tools and attackers tested against with a number for the minimum delay in minutes, such as B3 or C5. Rated shutters are used on pharmacies, jewellers, phone shops, plant rooms and critical infrastructure.

Features to choose from

  • Installed as tested to keep the rating valid
  • STS 202 and BS EN 1627 products on request
  • Structural fixing checked at survey
  • Reinforced guides, curtain and locking
  • Products certified to LPS 1175 Issue 8
  • Ratings from A1 upwards to suit the risk
A heavy steel security shutter closed over a stone-faced commercial entrance at night

Guide prices in Worcestershire

LPS 1175 high-security shutters guide prices
OptionEx VATInc VAT
D10 and above, or wider openingsAfter surveyAfter survey
C5 rated shutter, up to 3m wide£4,495 to £8,495£5,394 to £10,194
A1 or B3 rated shutter, up to 3m wide£2,795 to £5,495£3,354 to £6,594

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Worcestershire

We cover Worcestershire from Worcester to Redditch, Kidderminster and Malvern, with 8 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Rated security products

LPS 1175 certification belongs to the manufacturer's tested product. We give you the certificate reference with your quote and install the shutter to the tested specification. We do not hold or claim certification ourselves.

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Worcestershire

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Worcestershire

Is SR2 the same as B3?

The two systems are different, but as a rough guide SR1 corresponds to A1, SR2 to B3 and SR3 to C5. Your insurer's wording tells you which version they require.

Does my insurer need a rated shutter?

Some policies specify a minimum rating for certain trades or stock values. Check your policy schedule, or send it to us and we will match the product to it.

Do you hold LPCB certification?

The certification belongs to the manufacturer's tested shutter, not to us. We supply certified products, give you the certificate reference with the quote, and install them to the tested specification.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

Other services in Worcestershire

See everything we do in Worcestershire, or read about LPS 1175 high-security shutters.

Get a fixed price in Worcestershire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248