Manual to electric conversion in Cheshire
Need manual to electric conversion in Cheshire? We cover Warrington, Chester and Crewe and the rest of the area. Tell us what the shutter is doing and we will price the visit.
Guide prices for manual to electric conversion in Cheshire run from £295 to £2,195 ex VAT (£354 to £2,634 inc VAT) for the common jobs, with the exact figure fixed in writing before work starts.
- England
- North West
- From £295 + VAT
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
How manual to electric conversion works, and what to ask for
Heavier steel curtains may need a larger barrel or a different drive to motorise properly. The existing curtain and box are inspected first, because a worn shutter is not worth motorising. A key switch is the usual control for shops, with remotes and timers as options.
A tube motor is fitted into the barrel, replacing the spring on most push-up shutters. The shutter needs a power supply nearby; a fused spur is ideal and a new circuit is quoted separately if needed.
Specification options
- Commissioning and safety checks
- Electrical connection by a qualified electrician
- Manual override for power cuts
- Options for heavy steel curtains
- Single-visit fitting in most cases
- Condition check of curtain, barrel and box

Guide prices in Cheshire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Industrial door conversion | £895 to £2,195 | £1,074 to £2,634 |
| Shopfront shutter conversion, up to 3m | £445 to £895 | £534 to £1,074 |
| Domestic window shutter conversion | £295 to £595 | £354 to £714 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Covering Cheshire
We cover Cheshire from Warrington to Chester, Crewe and Ellesmere Port, with 11 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Cheshire
- Manual to electric conversion in Warrington
- Manual to electric conversion in Chester
- Manual to electric conversion in Crewe
- Manual to electric conversion in Ellesmere Port
- Manual to electric conversion in Widnes
- Manual to electric conversion in Runcorn
- Manual to electric conversion in Macclesfield
- Manual to electric conversion in Northwich
- Manual to electric conversion in Winsford
- Manual to electric conversion in Congleton
- Manual to electric conversion in Wilmslow
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Before you book in Cheshire
Do I need an electrician?
The shutter needs a power supply nearby. The connection is made by a qualified electrician, and a new circuit is quoted separately if there is no supply.
Can any manual shutter be converted?
Most can, if the curtain, barrel and box are in good condition. Very worn or damaged shutters are better replaced, and we tell you which at survey.
How long does a conversion take?
Usually a single visit once the motor and controls are ready.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Can you fit outside trading hours?
Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.
Other services in Cheshire
- Steel roller shutters in Cheshire
- Perforated & punched shutters in Cheshire
- Shutter servicing & maintenance in Cheshire
- Aluminium roller shutters in Cheshire
- Fire shutter servicing & drop tests in Cheshire
- Shutter motor replacement in Cheshire
- Security roller shutters in Cheshire
- Roller shutter repairs in Cheshire
- Manual roller shutters in Cheshire
See everything we do in Cheshire, or read about manual to electric conversion.
Get a fixed price in Cheshire
Free survey, made-to-measure shutters and a written quote before any work starts.
