Manual to electric conversion in Hertfordshire
We provide manual to electric conversion throughout Hertfordshire: Watford, Hemel Hempstead and Stevenage and the towns in between, with the price agreed before work starts.
Guide prices for manual to electric conversion in Hertfordshire run from £295 to £2,195 ex VAT (£354 to £2,634 inc VAT) for the common jobs, with the exact figure fixed in writing before work starts.
- England
- East of England
- From £295 + VAT
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
Choosing manual to electric conversion for premises in Hertfordshire
The existing curtain and box are inspected first, because a worn shutter is not worth motorising. The work is usually done in a single visit once the parts are ready. A key switch is the usual control for shops, with remotes and timers as options.
Converting is often a good step before an older shutter's spring fails. A tube motor is fitted into the barrel, replacing the spring on most push-up shutters.
What's included
- Manual override for power cuts
- Key switch, remote or timer control
- Commissioning and safety checks
- Tube motor sized to the curtain
- Condition check of curtain, barrel and box
- Electrical connection by a qualified electrician

Guide prices in Hertfordshire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Industrial door conversion | £895 to £2,195 | £1,074 to £2,634 |
| Shopfront shutter conversion, up to 3m | £445 to £895 | £534 to £1,074 |
| Domestic window shutter conversion | £295 to £595 | £354 to £714 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Covering Hertfordshire
We cover Hertfordshire from Watford to Hemel Hempstead, Stevenage and St Albans, with 18 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Hertfordshire
- Manual to electric conversion in Watford
- Manual to electric conversion in Hemel Hempstead
- Manual to electric conversion in Stevenage
- Manual to electric conversion in St Albans
- Manual to electric conversion in Welwyn Garden City
- Manual to electric conversion in Cheshunt
- Manual to electric conversion in Hatfield
- Manual to electric conversion in Bishop's Stortford
- Manual to electric conversion in Borehamwood
- Manual to electric conversion in Hitchin
- Manual to electric conversion in Hoddesdon
- Manual to electric conversion in Letchworth Garden City
- Manual to electric conversion in Harpenden
- Manual to electric conversion in Bushey
- Manual to electric conversion in Hertford
- Manual to electric conversion in Rickmansworth
- Manual to electric conversion in Potters Bar
- Manual to electric conversion in Berkhamsted
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Questions about manual to electric conversion in Hertfordshire
Will it still open in a power cut?
Yes, a manual override is fitted as part of the conversion.
Can any manual shutter be converted?
Most can, if the curtain, barrel and box are in good condition. Very worn or damaged shutters are better replaced, and we tell you which at survey.
Do I need an electrician?
The shutter needs a power supply nearby. The connection is made by a qualified electrician, and a new circuit is quoted separately if there is no supply.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
How long does it take from order to fitting?
Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.
Other services in Hertfordshire
- Steel roller shutters in Hertfordshire
- Manual roller shutters in Hertfordshire
- Aluminium roller shutters in Hertfordshire
- LPS 1175 high-security shutters in Hertfordshire
- Electric roller shutters in Hertfordshire
- Insulated roller shutters in Hertfordshire
- Roller shutter installation in Hertfordshire
- Fire shutter servicing & drop tests in Hertfordshire
- Shutter replacement in Hertfordshire
See everything we do in Hertfordshire, or read about manual to electric conversion.
Get a fixed price in Hertfordshire
Free survey, made-to-measure shutters and a written quote before any work starts.
