Security roller shutters in Clwyd
Security roller shutters for shops, offices and commercial units in Clwyd. We work in Wrexham, Buckley and Deeside, with prices confirmed in writing before work starts.
Guide prices for security roller shutters in Clwyd run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Wales
- 8 towns covered
- From £945 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
How security roller shutters work, and what to ask for
Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock. Aluminium laths keep the curtain light and quiet, while galvanised steel adds weight and resistance for higher-risk premises. The shutter box can sit outside the opening, behind a fascia or inside the building, which affects both appearance and planning.
Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts. A powder-coated finish in a RAL colour lets the shutter match a shopfront or cladding instead of standing out in bare metal.
What's included
- Key switch, remote control or timer operation
- External, behind-fascia or internal shutter box
- Aluminium or galvanised steel laths, single or double-skin
- Powder coating to a RAL colour of your choice
- Solid, perforated, punched or vision laths
- Manual push-up, hand-crank or electric operation
Guide prices in Clwyd
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Electric insulated shutter in a RAL colour, up to 3m | £2,145 to £3,595 | £2,574 to £4,314 |
| Electric shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Manual shutter, opening up to 2.5m wide | £945 to £1,795 | £1,134 to £2,154 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Clwyd
We cover Clwyd from Wrexham to Buckley, Deeside and Colwyn Bay, with 8 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.
Rules in Wales
Planning permission for shopfront shutters
In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
Towns we cover in Clwyd
How it works
Tell us about the opening
Send the postcode, a rough size and a photo if you have one, using the form or a call.
Free survey
We measure, check the structure, power supply and planning position, and talk through options.
Written fixed price
You get a written quote with the product, finish, controls and price before anything is ordered.
Made, fitted and handed over
The shutter is made to measure, fitted, commissioned and handed over with its documents.
Questions about security roller shutters in Clwyd
How long does a roller shutter take to fit?
Most single shopfront shutters are fitted in a day once they have been made. Wider frontages, steel-framed openings or new power supplies can add time, and we confirm the installation day with your quote.
Can a roller shutter be fitted inside the shop?
Yes. Internal shutters sit behind the glazing, which protects the stock and usually avoids external planning issues, although the glass itself is left exposed.
Should I choose aluminium or steel?
Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
Other services in Clwyd
- Electric roller shutters in Clwyd
- Shutter servicing & maintenance in Clwyd
- Retractable security grilles in Clwyd
- Fire shutter servicing & drop tests in Clwyd
- Roller shutter repairs in Clwyd
- Manual to electric conversion in Clwyd
- Manual roller shutters in Clwyd
- Shutter motor replacement in Clwyd
- Perforated & punched shutters in Clwyd
See everything we do in Clwyd, or read about security roller shutters.
Get a fixed price in Clwyd
Free survey, made-to-measure shutters and a written quote before any work starts.