Security roller shutters in County Tyrone
We supply, fit and maintain security roller shutters throughout County Tyrone: Omagh, Dungannon and Strabane and the towns in between.
Guide prices for security roller shutters in County Tyrone run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Northern Ireland
- 4 towns covered
- From £945 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
How security roller shutters work, and what to ask for
Aluminium laths keep the curtain light and quiet, while galvanised steel adds weight and resistance for higher-risk premises. Insulated double-skin laths reduce heat loss and noise through the opening, which helps unheated units and stock rooms. Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock.
Bottom-rail locks, wind locks and anti-lift blocks stop the curtain being forced upwards or bowed out of its guides. Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer.
Options we can specify
- External, behind-fascia or internal shutter box
- Manual push-up, hand-crank or electric operation
- LPS 1175 rated options for higher-risk premises
- Safety edge or photocells where the risk assessment calls for them
- Aluminium or galvanised steel laths, single or double-skin
- Bottom-rail locks, wind locks and anti-lift blocks
Guide prices in County Tyrone
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Electric insulated shutter in a RAL colour, up to 3m | £2,145 to £3,595 | £2,574 to £4,314 |
| Electric shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Manual shutter, opening up to 2.5m wide | £945 to £1,795 | £1,134 to £2,154 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering County Tyrone
We cover County Tyrone from Omagh to Dungannon, Strabane and Cookstown, with 4 towns listed below. Planning decisions for external shutters sit with your local council in Northern Ireland, and we check the position at survey.
Rules in Northern Ireland
Planning permission for shopfront shutters
In Northern Ireland planning permission for an external shopfront shutter is decided by your local council, which took over most planning decisions in 2015, and a listed building also needs listed building consent. Design guidance generally favours shutters that keep the frontage visible.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations, by a qualified electrician. Northern Ireland has its own building regulations, and any building control requirement for the work is confirmed with your council.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Security roller shutters: common questions
How long does a roller shutter take to fit?
Most single shopfront shutters are fitted in a day once they have been made. Wider frontages, steel-framed openings or new power supplies can add time, and we confirm the installation day with your quote.
Will I need planning permission?
External shutters on commercial premises usually need planning permission, and listed buildings need listed building consent. We flag this at survey so you can apply before the shutter is ordered.
Should I choose aluminium or steel?
Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.
Do you work with landlords and managing agents?
Yes. We quote, fit and service shutters for landlords, managing agents and facilities teams, including multi-site planned maintenance.
Can you fit outside trading hours?
Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.
Other services in County Tyrone
- Counter & hatch shutters in County Tyrone
- Roller shutter repairs in County Tyrone
- Aluminium roller shutters in County Tyrone
- Steel roller shutters in County Tyrone
- LPS 1175 high-security shutters in County Tyrone
- High-speed doors in County Tyrone
- Manual to electric conversion in County Tyrone
- Garage roller doors in County Tyrone
- Fire shutters in County Tyrone
See everything we do in County Tyrone, or read about security roller shutters.
Get a fixed price in County Tyrone
Free survey, made-to-measure shutters and a written quote before any work starts.