Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Security roller shutters in Christchurch

From the BH23 postcode district outwards, we cover Christchurch for security roller shutters, with planning and power checked at survey.

In Christchurch, security roller shutters typically cost £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • BH23 and nearby
  • Dorset
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How security roller shutters work, and what to ask for

Insulated double-skin laths reduce heat loss and noise through the opening, which helps unheated units and stock rooms. Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer.

Bottom-rail locks, wind locks and anti-lift blocks stop the curtain being forced upwards or bowed out of its guides. Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts.

What's included

  • Manual push-up, hand-crank or electric operation
  • Solid, perforated, punched or vision laths
  • LPS 1175 rated options for higher-risk premises
  • Bottom-rail locks, wind locks and anti-lift blocks
  • Manual override for power cuts on electric shutters
  • Powder coating to a RAL colour of your choice
A light grey aluminium security roller shutter part-lowered over a glazed commercial unit

Guide prices in Christchurch

Security roller shutters guide prices
OptionEx VATInc VAT
Electric insulated shutter in a RAL colour, up to 3m£2,145 to £3,595£2,574 to £4,314
Electric shutter, opening up to 3m wide£1,495 to £2,795£1,794 to £3,354
Manual shutter, opening up to 2.5m wide£945 to £1,795£1,134 to £2,154

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Christchurch and nearby

Jobs in Christchurch are planned as part of our Dorset coverage, and visits can be combined with jobs in nearby New Milton, Poole and Totton. Planning rules are those of your local council in England.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Questions about security roller shutters in Christchurch

Do you cover Christchurch?

Yes. Send the postcode and we will arrange a survey in Christchurch. We also cover nearby New Milton, Poole and Totton.

Will I need planning permission?

External shutters on commercial premises usually need planning permission, and listed buildings need listed building consent. We flag this at survey so you can apply before the shutter is ordered.

Can a roller shutter be fitted inside the shop?

Yes. Internal shutters sit behind the glazing, which protects the stock and usually avoids external planning issues, although the glass itself is left exposed.

Should I choose aluminium or steel?

Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

More shutter services near you

See everything we do in Christchurch, across Dorset, or read about security roller shutters.

Get a fixed price in Christchurch

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248