Security roller shutters in Gloucestershire
Security roller shutters for shops, offices and commercial units in Gloucestershire. We work in Gloucester, Cheltenham and Stroud, with prices confirmed in writing before work starts.
Guide prices for security roller shutters in Gloucestershire run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- England
- South West
- From £945 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
How security roller shutters work, and what to ask for
Aluminium laths keep the curtain light and quiet, while galvanised steel adds weight and resistance for higher-risk premises. Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock. Bottom-rail locks, wind locks and anti-lift blocks stop the curtain being forced upwards or bowed out of its guides.
Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts. Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer.
What's included
- Aluminium or galvanised steel laths, single or double-skin
- Manual push-up, hand-crank or electric operation
- LPS 1175 rated options for higher-risk premises
- Solid, perforated, punched or vision laths
- Safety edge or photocells where the risk assessment calls for them
- External, behind-fascia or internal shutter box
Guide prices in Gloucestershire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Electric insulated shutter in a RAL colour, up to 3m | £2,145 to £3,595 | £2,574 to £4,314 |
| Electric shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Manual shutter, opening up to 2.5m wide | £945 to £1,795 | £1,134 to £2,154 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Gloucestershire
We cover Gloucestershire from Gloucester to Cheltenham, Stroud and Kingswood, with 7 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Planning permission for shopfront shutters
In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Security roller shutters: common questions
Can a roller shutter be fitted inside the shop?
Yes. Internal shutters sit behind the glazing, which protects the stock and usually avoids external planning issues, although the glass itself is left exposed.
Should I choose aluminium or steel?
Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.
Will I need planning permission?
External shutters on commercial premises usually need planning permission, and listed buildings need listed building consent. We flag this at survey so you can apply before the shutter is ordered.
Who carries out the work?
Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Other services in Gloucestershire
- Electric roller shutters in Gloucestershire
- Steel roller shutters in Gloucestershire
- Shutter replacement in Gloucestershire
- Aluminium roller shutters in Gloucestershire
- Retractable security grilles in Gloucestershire
- Fire shutters in Gloucestershire
- LPS 1175 high-security shutters in Gloucestershire
- Manual to electric conversion in Gloucestershire
- Industrial roller shutter doors in Gloucestershire
See everything we do in Gloucestershire, or read about security roller shutters.
Get a fixed price in Gloucestershire
Free survey, made-to-measure shutters and a written quote before any work starts.