Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Security roller shutters in Kent

We supply, fit and maintain security roller shutters throughout Kent: Maidstone, Gillingham and Chatham and the towns in between.

Guide prices for security roller shutters in Kent run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • South East
  • From £945 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How security roller shutters work, and what to ask for

A powder-coated finish in a RAL colour lets the shutter match a shopfront or cladding instead of standing out in bare metal. Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock. Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer.

Bottom-rail locks, wind locks and anti-lift blocks stop the curtain being forced upwards or bowed out of its guides. The shutter box can sit outside the opening, behind a fascia or inside the building, which affects both appearance and planning.

Options we can specify

  • External, behind-fascia or internal shutter box
  • Powder coating to a RAL colour of your choice
  • Aluminium or galvanised steel laths, single or double-skin
  • Manual push-up, hand-crank or electric operation
  • Manual override for power cuts on electric shutters
  • Safety edge or photocells where the risk assessment calls for them
A light grey aluminium security roller shutter part-lowered over a glazed commercial unit

Guide prices in Kent

Security roller shutters guide prices
OptionEx VATInc VAT
Electric insulated shutter in a RAL colour, up to 3m£2,145 to £3,595£2,574 to £4,314
Electric shutter, opening up to 3m wide£1,495 to £2,795£1,794 to £3,354
Manual shutter, opening up to 2.5m wide£945 to £1,795£1,134 to £2,154

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Kent

We cover Kent from Maidstone to Gillingham, Chatham and Tunbridge Wells, with 23 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Kent

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Your questions answered

Do electric shutters still work in a power cut?

Electric shutters are fitted with a manual override, usually a hand crank or a release, so the shutter can be opened or closed without power.

Should I choose aluminium or steel?

Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.

Can a roller shutter be fitted inside the shop?

Yes. Internal shutters sit behind the glazing, which protects the stock and usually avoids external planning issues, although the glass itself is left exposed.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

What warranty do I get?

Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.

Other services in Kent

See everything we do in Kent, or read about security roller shutters.

Get a fixed price in Kent

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248