Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248

Security roller shutters in Mid Glamorgan

We supply, fit and maintain security roller shutters throughout Mid Glamorgan: Rhondda, Tonypandy and Bridgend and the towns in between.

Guide prices for security roller shutters in Mid Glamorgan run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Wales
  • 8 towns covered
  • From £945 + VAT

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about security roller shutters in Mid Glamorgan

Aluminium laths keep the curtain light and quiet, while galvanised steel adds weight and resistance for higher-risk premises. Insulated double-skin laths reduce heat loss and noise through the opening, which helps unheated units and stock rooms. Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer.

A powder-coated finish in a RAL colour lets the shutter match a shopfront or cladding instead of standing out in bare metal. Where an insurer or police adviser asks for a tested product, rated shutters certified to LPS 1175 are available.

What's included

  • Key switch, remote control or timer operation
  • Powder coating to a RAL colour of your choice
  • Manual override for power cuts on electric shutters
  • Safety edge or photocells where the risk assessment calls for them
  • Manual push-up, hand-crank or electric operation
  • Bottom-rail locks, wind locks and anti-lift blocks
A light grey aluminium security roller shutter part-lowered over a glazed commercial unit

Guide prices in Mid Glamorgan

Security roller shutters guide prices
OptionEx VATInc VAT
Electric insulated shutter in a RAL colour, up to 3m£2,145 to £3,595£2,574 to £4,314
Electric shutter, opening up to 3m wide£1,495 to £2,795£1,794 to £3,354
Manual shutter, opening up to 2.5m wide£945 to £1,795£1,134 to £2,154

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Mid Glamorgan

We cover Mid Glamorgan from Rhondda to Tonypandy, Bridgend and Merthyr Tydfil, with 8 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.

Rules in Wales

Planning permission for shopfront shutters

In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Security roller shutters: common questions

Will I need planning permission?

External shutters on commercial premises usually need planning permission, and listed buildings need listed building consent. We flag this at survey so you can apply before the shutter is ordered.

Can a roller shutter be fitted inside the shop?

Yes. Internal shutters sit behind the glazing, which protects the stock and usually avoids external planning issues, although the glass itself is left exposed.

Do electric shutters still work in a power cut?

Electric shutters are fitted with a manual override, usually a hand crank or a release, so the shutter can be opened or closed without power.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

Get a fixed price in Mid Glamorgan

Free survey, made-to-measure shutters and a written quote before any work starts.