Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Security roller shutters in Nottinghamshire

Security roller shutters for shops, offices and commercial units in Nottinghamshire. We work in Nottingham, Mansfield and Worksop, with prices confirmed in writing before work starts.

Guide prices for security roller shutters in Nottinghamshire run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • East Midlands
  • From £945 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How security roller shutters work, and what to ask for

Bottom-rail locks, wind locks and anti-lift blocks stop the curtain being forced upwards or bowed out of its guides. Where an insurer or police adviser asks for a tested product, rated shutters certified to LPS 1175 are available. Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock.

Insulated double-skin laths reduce heat loss and noise through the opening, which helps unheated units and stock rooms. Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts.

Options we can specify

  • Manual push-up, hand-crank or electric operation
  • Safety edge or photocells where the risk assessment calls for them
  • Manual override for power cuts on electric shutters
  • Key switch, remote control or timer operation
  • LPS 1175 rated options for higher-risk premises
  • Solid, perforated, punched or vision laths
A light grey aluminium security roller shutter part-lowered over a glazed commercial unit

Guide prices in Nottinghamshire

Security roller shutters guide prices
OptionEx VATInc VAT
Electric insulated shutter in a RAL colour, up to 3m£2,145 to £3,595£2,574 to £4,314
Electric shutter, opening up to 3m wide£1,495 to £2,795£1,794 to £3,354
Manual shutter, opening up to 2.5m wide£945 to £1,795£1,134 to £2,154

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Nottinghamshire

We cover Nottinghamshire from Nottingham to Mansfield, Worksop and Newark-on-Trent, with 10 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Nottinghamshire

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Questions about security roller shutters in Nottinghamshire

Should I choose aluminium or steel?

Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.

Will I need planning permission?

External shutters on commercial premises usually need planning permission, and listed buildings need listed building consent. We flag this at survey so you can apply before the shutter is ordered.

How long does a roller shutter take to fit?

Most single shopfront shutters are fitted in a day once they have been made. Wider frontages, steel-framed openings or new power supplies can add time, and we confirm the installation day with your quote.

What details help you quote quickly?

The postcode, the approximate width and height of the opening, whether you want manual or electric operation, and a photo of the frontage.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Other services in Nottinghamshire

See everything we do in Nottinghamshire, or read about security roller shutters.

Get a fixed price in Nottinghamshire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248