Security roller shutters in Staffordshire
Security roller shutters across Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme and Burton upon Trent. Free survey, fixed written price and made-to-measure products.
Guide prices for security roller shutters in Staffordshire run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- England
- West Midlands
- From £945 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Choosing security roller shutters for premises in Staffordshire
Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts. Aluminium laths keep the curtain light and quiet, while galvanised steel adds weight and resistance for higher-risk premises. Bottom-rail locks, wind locks and anti-lift blocks stop the curtain being forced upwards or bowed out of its guides.
Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer. Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock.
Options we can specify
- Aluminium or galvanised steel laths, single or double-skin
- Manual override for power cuts on electric shutters
- Manual push-up, hand-crank or electric operation
- Powder coating to a RAL colour of your choice
- Bottom-rail locks, wind locks and anti-lift blocks
- Solid, perforated, punched or vision laths

Guide prices in Staffordshire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Electric insulated shutter in a RAL colour, up to 3m | £2,145 to £3,595 | £2,574 to £4,314 |
| Electric shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Manual shutter, opening up to 2.5m wide | £945 to £1,795 | £1,134 to £2,154 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Staffordshire
We cover Staffordshire from Stoke-on-Trent to Newcastle-under-Lyme, Burton upon Trent and Cannock, with 11 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Planning permission for shopfront shutters
In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Staffordshire
- Security roller shutters in Stoke-on-Trent
- Security roller shutters in Newcastle-under-Lyme
- Security roller shutters in Burton upon Trent
- Security roller shutters in Cannock
- Security roller shutters in Tamworth
- Security roller shutters in Stafford
- Security roller shutters in Lichfield
- Security roller shutters in Kidsgrove
- Security roller shutters in Burntwood
- Security roller shutters in Longton
- Security roller shutters in Rugeley
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Questions about security roller shutters in Staffordshire
Do electric shutters still work in a power cut?
Electric shutters are fitted with a manual override, usually a hand crank or a release, so the shutter can be opened or closed without power.
Will I need planning permission?
External shutters on commercial premises usually need planning permission, and listed buildings need listed building consent. We flag this at survey so you can apply before the shutter is ordered.
How long does a roller shutter take to fit?
Most single shopfront shutters are fitted in a day once they have been made. Wider frontages, steel-framed openings or new power supplies can add time, and we confirm the installation day with your quote.
Can I get a quote from photos?
Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.
Is the survey free?
Yes, for new shutters, grilles and doors: the survey and written quote are free and there is no obligation to go ahead. Repair and servicing visits are charged, and we tell you the price before we visit.
Other services in Staffordshire
- Shop front shutters in Staffordshire
- Fire shutter servicing & drop tests in Staffordshire
- Insulated roller shutters in Staffordshire
- Steel roller shutters in Staffordshire
- Garage roller doors in Staffordshire
- Aluminium roller shutters in Staffordshire
- Shutter motor replacement in Staffordshire
- Manual roller shutters in Staffordshire
- Shutter servicing & maintenance in Staffordshire
See everything we do in Staffordshire, or read about security roller shutters.
Get a fixed price in Staffordshire
Free survey, made-to-measure shutters and a written quote before any work starts.
