Roller shutter repairs in Denton
Need roller shutter repairs in Denton? Describe the problem, send a photo if you can, and we will confirm the price before an engineer visits.
In the M34 area, roller shutter repairs typically cost £90 to £695 ex VAT (£108 to £834 inc VAT). We confirm a fixed price before any parts are fitted.
- M34 and nearby
- Greater Manchester
- England
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
Choosing roller shutter repairs for premises in Denton
We repair most makes and types, from small window shutters to industrial doors. Motor faults can be a failed motor, a tripped limit setting, a faulty key switch or a power issue, which is diagnosed on site.
A curtain that has jumped out of its guides is one of the most common faults, often after a knock or strong wind. Damaged laths can usually be cut out and replaced individually rather than replacing the whole curtain.
Specification options
- Damaged lath replacement
- Key switch, remote and receiver repairs
- Motor, limit and control faults
- Curtains refitted into guides
- Spring re-tensioning and replacement
- Safety checks after every repair
Guide prices in Denton
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Tube motor replacement | £345 to £695 | £414 to £834 |
| Key switch, control box or remote | £120 to £345 | £144 to £414 |
| Replace damaged laths | £145 to £595 | £174 to £714 |
| Spring or barrel work | £195 to £445 | £234 to £534 |
| Curtain refitted into its guides | £120 to £280 | £144 to £336 |
| Service and adjust, single shutter | £90 to £180 | £108 to £216 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Where we work around Denton
Denton sits in Greater Manchester, roughly 5 miles from Manchester. Whether the job is in the M34 district or nearby Hyde, Dukinfield and Droylsden, the survey and quote work the same way.
Rules in England
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Your questions answered
Do you cover Denton?
Yes. Send the postcode and we will arrange a survey in Denton. We also cover nearby Hyde, Dukinfield and Droylsden.
Can you repair a shutter you did not fit?
Yes. We repair most makes and types of roller shutter, grille and industrial door.
Is it worth repairing an old shutter?
Often, yes. Motors, springs and laths can be replaced individually. If the curtain or box is badly worn, we will price a replacement so you can compare.
My shutter is stuck half open. What should I do?
Stop using it and do not force it, as a jammed curtain or failing spring can drop suddenly. Keep people clear and book a repair.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
Also available in Denton
- High-speed doors in Denton
- Manual to electric conversion in Denton
- Aluminium roller shutters in Denton
- Roller grilles in Denton
- LPS 1175 high-security shutters in Denton
- Electric roller shutters in Denton
See everything we do in Denton, across Greater Manchester, or read about roller shutter repairs.
Get a fixed price in Denton
Free survey, made-to-measure shutters and a written quote before any work starts.