Roller shutter repairs in Yeadon
Roller shutter repairs in Yeadon and the LS19 district, for most makes of shutter and door. Tell us what is wrong and we will price the visit.
In the LS19 area, roller shutter repairs typically cost £90 to £695 ex VAT (£108 to £834 inc VAT). We confirm a fixed price before any parts are fitted.
- LS19 and nearby
- West Yorkshire
- England
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
How roller shutter repairs work, and what to ask for
After a repair, powered shutters are checked so the safety devices and limits work correctly. Grinding or squealing usually points to dry or damaged guides, bearings or end plates.
Damaged laths can usually be cut out and replaced individually rather than replacing the whole curtain. Broken or weak springs make manual shutters heavy or impossible to lift, and are replaced or re-tensioned.
What's included
- Motor, limit and control faults
- Bottom rail and lock repairs
- Guide, bearing and end plate repairs
- Safety checks after every repair
- Damaged lath replacement
- Spring re-tensioning and replacement

Guide prices in Yeadon
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Tube motor replacement | £345 to £695 | £414 to £834 |
| Key switch, control box or remote | £120 to £345 | £144 to £414 |
| Replace damaged laths | £145 to £595 | £174 to £714 |
| Spring or barrel work | £195 to £445 | £234 to £534 |
| Curtain refitted into its guides | £120 to £280 | £144 to £336 |
| Service and adjust, single shutter | £90 to £180 | £108 to £216 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Where we work around Yeadon
Yeadon sits in West Yorkshire, roughly 7 miles from Leeds. Whether the job is in the LS19 district or nearby Guiseley, Shipley and Pudsey, the survey and quote work the same way.
Rules in England
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Questions about roller shutter repairs in Yeadon
Do you cover Yeadon?
Yes. We survey, fit and repair roller shutter repairs in Yeadon and the LS19 district, as part of our coverage across West Yorkshire.
Is it worth repairing an old shutter?
Often, yes. Motors, springs and laths can be replaced individually. If the curtain or box is badly worn, we will price a replacement so you can compare.
Can you repair a shutter you did not fit?
Yes. We repair most makes and types of roller shutter, grille and industrial door.
Why does my electric shutter stop halfway?
Common causes are incorrect limit settings, an obstruction, a safety edge fault or a motor overheating. An engineer can diagnose it on site.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
More shutter services near you
- Perforated & punched shutters in Yeadon
- Steel roller shutters in Yeadon
- Shutter motor replacement in Yeadon
- Home security shutters in Yeadon
- Counter & hatch shutters in Yeadon
- Shutter replacement in Yeadon
See everything we do in Yeadon, across West Yorkshire, or read about roller shutter repairs.
Get a fixed price in Yeadon
Free survey, made-to-measure shutters and a written quote before any work starts.
