Steel roller shutters in Dyfed
We supply, fit and maintain steel roller shutters throughout Dyfed: Llanelli, Ammanford and Carmarthen and the towns in between.
Guide prices for steel roller shutters in Dyfed run from £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Wales
- 6 towns covered
- From £1,095 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
What to know about steel roller shutters in Dyfed
Steel is the common choice for garages, lock-ups, plant rooms and loading bays. Steel resists cutting and impact better than foam-filled aluminium, which suits higher-risk premises. Single-skin steel is noisier than insulated aluminium, which matters on mixed residential streets.
Steel shutters are the usual base for fire-rated and many LPS 1175 rated shutters. Deep steel guide rails and wind locks keep wide steel curtains in place in high winds.
Features to choose from
- Powder coating available over galvanising
- Bottom-rail locks and anti-lift
- Manual, crank or electric operation
- Stronger motors, springs and gearboxes
- Wicket doors on industrial doors
- Deep guide rails and wind locks for wide openings
Guide prices in Dyfed
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Powder-coated steel shutter, electric, 4m to 6m | £2,595 to £5,195 | £3,114 to £6,234 |
| Galvanised steel shutter, electric, up to 4m | £1,795 to £3,395 | £2,154 to £4,074 |
| Galvanised steel shutter, manual, up to 3m | £1,095 to £1,995 | £1,314 to £2,394 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Dyfed
We cover Dyfed from Llanelli to Ammanford, Carmarthen and Aberystwyth, with 6 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.
Rules in Wales
Planning permission for shopfront shutters
In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Steel roller shutters: common questions
Will a steel shutter rust?
Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.
Are steel shutters noisy?
Single-skin steel is noisier than insulated aluminium. If noise matters, insulated double-skin laths and a well-adjusted motor help.
Can a steel shutter have a door in it?
Yes, industrial steel shutters can include a wicket door so people can enter without raising the whole curtain.
Do you work with landlords and managing agents?
Yes. We quote, fit and service shutters for landlords, managing agents and facilities teams, including multi-site planned maintenance.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Other services in Dyfed
- Fire shutters in Dyfed
- Electric roller shutters in Dyfed
- Shutter replacement in Dyfed
- Roller shutter repairs in Dyfed
- Aluminium roller shutters in Dyfed
- Home security shutters in Dyfed
- Counter & hatch shutters in Dyfed
- Industrial roller shutter doors in Dyfed
- Perforated & punched shutters in Dyfed
See everything we do in Dyfed, or read about steel roller shutters.
Get a fixed price in Dyfed
Free survey, made-to-measure shutters and a written quote before any work starts.