Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Steel roller shutters in Mid Glamorgan

Steel roller shutters for shops, garages and industrial units in Mid Glamorgan. We work in Rhondda, Tonypandy and Bridgend, with prices confirmed in writing before work starts.

Guide prices for steel roller shutters in Mid Glamorgan run from £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Wales
  • 8 towns covered
  • From £1,095 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about steel roller shutters in Mid Glamorgan

Industrial steel doors can include a wicket door so people can enter without raising the whole curtain. Steel shutters can be insulated with a double-skin lath where heat loss through the opening matters. Single-skin steel is noisier than insulated aluminium, which matters on mixed residential streets.

Steel curtains are heavier, so they are paired with stronger motors, springs or crank gearboxes. Steel resists cutting and impact better than foam-filled aluminium, which suits higher-risk premises.

Features to choose from

  • Insulated steel options
  • Powder coating available over galvanising
  • Wicket doors on industrial doors
  • Manual, crank or electric operation
  • Stronger motors, springs and gearboxes
  • Deep guide rails and wind locks for wide openings
A galvanised steel roller shutter closed on an industrial unit

Guide prices in Mid Glamorgan

Steel roller shutters guide prices
OptionEx VATInc VAT
Powder-coated steel shutter, electric, 4m to 6m£2,595 to £5,195£3,114 to £6,234
Galvanised steel shutter, electric, up to 4m£1,795 to £3,395£2,154 to £4,074
Galvanised steel shutter, manual, up to 3m£1,095 to £1,995£1,314 to £2,394

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Mid Glamorgan

We cover Mid Glamorgan from Rhondda to Tonypandy, Bridgend and Merthyr Tydfil, with 8 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.

Rules in Wales

Planning permission for shopfront shutters

In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.

Towns we cover in Mid Glamorgan

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Mid Glamorgan

Will a steel shutter rust?

Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.

Can a steel shutter have a door in it?

Yes, industrial steel shutters can include a wicket door so people can enter without raising the whole curtain.

Is steel more secure than aluminium?

Generally yes. Steel laths are harder to cut and dent, which is why steel is used for industrial and higher-risk premises. For independently tested resistance, look for an LPS 1175 rating.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Can you fit outside trading hours?

Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.

Other services in Mid Glamorgan

See everything we do in Mid Glamorgan, or read about steel roller shutters.

Get a fixed price in Mid Glamorgan

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248