Steel roller shutters in Renfrew
Looking for steel roller shutters in Renfrew? We survey the opening, price it in writing and fit it, with nothing ordered until you approve the quote.
In Renfrew, steel roller shutters typically cost £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.
- PA4 and nearby
- Renfrewshire & Inverclyde
- Scotland
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Steel roller shutters in Renfrew: the essentials
Steel curtains are heavier, so they are paired with stronger motors, springs or crank gearboxes. Steel shutters can be insulated with a double-skin lath where heat loss through the opening matters.
Steel shutters are the usual base for fire-rated and many LPS 1175 rated shutters. Deep steel guide rails and wind locks keep wide steel curtains in place in high winds.
Specification options
- Wicket doors on industrial doors
- Stronger motors, springs and gearboxes
- Bottom-rail locks and anti-lift
- Insulated steel options
- Galvanised steel laths, single or double-skin
- Powder coating available over galvanising

Guide prices in Renfrew
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Powder-coated steel shutter, electric, 4m to 6m | £2,595 to £5,195 | £3,114 to £6,234 |
| Galvanised steel shutter, electric, up to 4m | £1,795 to £3,395 | £2,154 to £4,074 |
| Galvanised steel shutter, manual, up to 3m | £1,095 to £1,995 | £1,314 to £2,394 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Renfrew and nearby
Our engineers travel across Renfrewshire & Inverclyde, including Renfrew (PA4). We also cover nearby Clydebank, Bearsden and Glasgow, so jobs at more than one site can be grouped into one visit.
Rules in Scotland
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Questions about steel roller shutters in Renfrew
Do you cover Renfrew?
Yes. Renfrew (PA4) is within our Renfrewshire & Inverclyde coverage, along with nearby Clydebank, Bearsden and Glasgow.
Are steel shutters noisy?
Single-skin steel is noisier than insulated aluminium. If noise matters, insulated double-skin laths and a well-adjusted motor help.
Will a steel shutter rust?
Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.
Can a steel shutter have a door in it?
Yes, industrial steel shutters can include a wicket door so people can enter without raising the whole curtain.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
Is the survey free?
Yes, for new shutters, grilles and doors: the survey and written quote are free and there is no obligation to go ahead. Repair and servicing visits are charged, and we tell you the price before we visit.
Also available in Renfrew
- Electric roller shutters in Renfrew
- Shop front shutters in Renfrew
- Retractable security grilles in Renfrew
- Perforated & punched shutters in Renfrew
- Shutter replacement in Renfrew
- Aluminium roller shutters in Renfrew
See everything we do in Renfrew, across Renfrewshire & Inverclyde, or read about steel roller shutters.
Get a fixed price in Renfrew
Free survey, made-to-measure shutters and a written quote before any work starts.
