Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Steel roller shutters in Telford

Made-to-measure steel roller shutters for shops, garages and industrial units in Telford and the wider TF3 area, with a free survey and a fixed price in writing.

In Telford, steel roller shutters typically cost £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • TF3 and nearby
  • Shropshire
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about steel roller shutters in Telford

Single-skin steel is noisier than insulated aluminium, which matters on mixed residential streets. Deep steel guide rails and wind locks keep wide steel curtains in place in high winds.

Industrial steel doors can include a wicket door so people can enter without raising the whole curtain. Steel resists cutting and impact better than foam-filled aluminium, which suits higher-risk premises.

Features to choose from

  • Powder coating available over galvanising
  • Wicket doors on industrial doors
  • Insulated steel options
  • Stronger motors, springs and gearboxes
  • Galvanised steel laths, single or double-skin
  • Bottom-rail locks and anti-lift
A galvanised steel roller shutter closed on an industrial unit

Guide prices in Telford

Steel roller shutters guide prices
OptionEx VATInc VAT
Powder-coated steel shutter, electric, 4m to 6m£2,595 to £5,195£3,114 to £6,234
Galvanised steel shutter, electric, up to 4m£1,795 to £3,395£2,154 to £4,074
Galvanised steel shutter, manual, up to 3m£1,095 to £1,995£1,314 to £2,394

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Where we work around Telford

We cover Telford, the TF3 district and nearby Wellington (Shropshire), Shrewsbury and Wolverhampton, as part of our Shropshire coverage.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Your questions answered

Do you cover Telford?

Yes. We survey, fit and repair steel roller shutters in Telford and the TF3 district, as part of our coverage across Shropshire.

Are steel shutters noisy?

Single-skin steel is noisier than insulated aluminium. If noise matters, insulated double-skin laths and a well-adjusted motor help.

Will a steel shutter rust?

Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.

Is steel more secure than aluminium?

Generally yes. Steel laths are harder to cut and dent, which is why steel is used for industrial and higher-risk premises. For independently tested resistance, look for an LPS 1175 rating.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Can I get a quote from photos?

Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.

More shutter services near you

See everything we do in Telford, across Shropshire, or read about steel roller shutters.

Get a fixed price in Telford

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248