Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Steel roller shutters in Penarth

Made-to-measure steel roller shutters for shops, garages and industrial units in Penarth and the wider CF64 area, with a free survey and a fixed price in writing.

In Penarth, steel roller shutters typically cost £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • CF64 and nearby
  • South Glamorgan
  • Wales
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Choosing steel roller shutters for premises in Penarth

Galvanised steel laths are zinc coated to protect against rust, and can be powder coated on top. Steel shutters can be insulated with a double-skin lath where heat loss through the opening matters.

Steel is the common choice for garages, lock-ups, plant rooms and loading bays. Deep steel guide rails and wind locks keep wide steel curtains in place in high winds.

What's included

  • Wicket doors on industrial doors
  • Stronger motors, springs and gearboxes
  • Galvanised steel laths, single or double-skin
  • Bottom-rail locks and anti-lift
  • Deep guide rails and wind locks for wide openings
  • Powder coating available over galvanising
A galvanised steel roller shutter closed on an industrial unit

Guide prices in Penarth

Steel roller shutters guide prices
OptionEx VATInc VAT
Powder-coated steel shutter, electric, 4m to 6m£2,595 to £5,195£3,114 to £6,234
Galvanised steel shutter, electric, up to 4m£1,795 to £3,395£2,154 to £4,074
Galvanised steel shutter, manual, up to 3m£1,095 to £1,995£1,314 to £2,394

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Penarth and nearby

Penarth sits in South Glamorgan, roughly 3 miles from Cardiff. Whether the job is in the CF64 district or nearby Barry, Caerphilly and Risca, the survey and quote work the same way.

Rules in Wales

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Penarth

Do you cover Penarth?

Yes. We survey, fit and repair steel roller shutters in Penarth and the CF64 district, as part of our coverage across South Glamorgan.

Will a steel shutter rust?

Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.

Are steel shutters noisy?

Single-skin steel is noisier than insulated aluminium. If noise matters, insulated double-skin laths and a well-adjusted motor help.

Is steel more secure than aluminium?

Generally yes. Steel laths are harder to cut and dent, which is why steel is used for industrial and higher-risk premises. For independently tested resistance, look for an LPS 1175 rating.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Can I get a quote from photos?

Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.

More shutter services near you

See everything we do in Penarth, across South Glamorgan, or read about steel roller shutters.

Get a fixed price in Penarth

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248