Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Aluminium roller shutters in County Down

We supply, fit and maintain aluminium roller shutters throughout County Down: Bangor (County Down), Newtownards and Newry and the towns in between.

Guide prices for aluminium roller shutters in County Down run from £1,195 to £3,595 ex VAT (£1,434 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Northern Ireland
  • 5 towns covered
  • From £1,195 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about aluminium roller shutters in County Down

A lighter curtain puts less strain on the motor, springs and barrel, which helps the shutter last. Foam-filled laths reduce noise and add a little insulation compared with single-skin metal. Extruded aluminium laths are solid profiles that are stronger and more resistant to forced entry than roll-formed laths.

Roll-formed aluminium laths are two skins of aluminium with an insulating foam core, which keeps them light. Aluminium curtains roll up tighter than steel, so the shutter box can often be smaller.

What's included

  • Powder coated to a RAL colour
  • Solid, perforated or vision laths
  • No rust, suited to coastal and exposed sites
  • Manual or electric operation
  • Quieter running than steel
  • Smaller shutter box than steel
A cut-away of a foam-filled double-skin aluminium shutter lath

Guide prices in County Down

Aluminium roller shutters guide prices
OptionEx VATInc VAT
Extruded aluminium shutter, up to 3m wide£1,895 to £3,595£2,274 to £4,314
Insulated aluminium shutter in a RAL colour, up to 3m£1,395 to £2,795£1,674 to £3,354
Foam-filled aluminium shutter, up to 3m wide£1,195 to £2,295£1,434 to £2,754

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering County Down

We cover County Down from Bangor (County Down) to Newtownards, Newry and Banbridge, with 5 towns listed below. Planning decisions for external shutters sit with your local council in Northern Ireland, and we check the position at survey.

Rules in Northern Ireland

Planning permission for shopfront shutters

In Northern Ireland planning permission for an external shopfront shutter is decided by your local council, which took over most planning decisions in 2015, and a listed building also needs listed building consent. Design guidance generally favours shutters that keep the frontage visible.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations, by a qualified electrician. Northern Ireland has its own building regulations, and any building control requirement for the work is confirmed with your council.

Towns we cover in County Down

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Aluminium roller shutters: common questions

Will an aluminium shutter dent?

Foam-filled laths can dent under a heavy impact. Extruded aluminium resists denting far better, and damaged laths can be replaced individually.

What is the difference between roll-formed and extruded aluminium?

Roll-formed laths are two thin skins with a foam core, which is light and insulating. Extruded laths are solid profiles, which are heavier and much stronger.

Is aluminium strong enough for a shop?

For most shops and offices, yes, especially extruded aluminium laths. For high-risk premises, galvanised steel or a rated shutter may be recommended.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

What details help you quote quickly?

The postcode, the approximate width and height of the opening, whether you want manual or electric operation, and a photo of the frontage.

Other services in County Down

See everything we do in County Down, or read about aluminium roller shutters.

Get a fixed price in County Down

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248