Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248

Industrial roller shutter doors in Fife

Need industrial roller shutter doors in Fife? We cover Dunfermline, Kirkcaldy and Glenrothes and the rest of the area, with planning and power checked at survey.

Guide prices for industrial roller shutter doors in Fife run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Scotland
  • 3 towns covered
  • From £2,495 + VAT

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

What to know about industrial roller shutter doors in Fife

Insulated laths reduce heat loss at loading bays and help temperature-controlled stock. Wicket doors and vision panels let staff walk through or see outside without opening the full door. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Safety edges, photocells and light curtains protect people and forklifts passing under the door. Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds.

Features to choose from

  • Safety edges, photocells and light curtains
  • Wicket doors and vision panels
  • Push-button, pull-cord, loop or remote control
  • Guide guards and bollards against impact
  • Galvanised steel or insulated laths
  • Single or three-phase drives
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Fife

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Fife

We cover Fife from Dunfermline to Kirkcaldy and Glenrothes, with 3 towns listed below. Planning decisions for external shutters sit with your local council in Scotland, and we check the position at survey.

Rules in Scotland

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Your questions answered

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

What warranty do I get?

Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.

Get a fixed price in Fife

Free survey, made-to-measure shutters and a written quote before any work starts.