Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Canning Town

We supply, fit and look after industrial roller shutter doors in Canning Town and nearby Stratford (London), Bow and Canary Wharf, from a single opening to a whole site.

Guide prices for industrial roller shutter doors in Canning Town run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT). Width, operation, lath type and finish make the biggest difference.

  • E16 and nearby
  • Greater London
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Planned maintenance keeps busy doors running and is part of keeping workplace equipment safe.

Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Specification options

  • Single or three-phase drives
  • Galvanised steel or insulated laths
  • Guide guards and bollards against impact
  • Wind locks and deep guide rails
  • Safety edges, photocells and light curtains
  • Direct-drive and chain motors for heavy use
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Canning Town

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Canning Town and nearby

If your premises are in Canning Town or nearby Stratford (London), Bow and Canary Wharf, we can survey and quote. Give us the full postcode, in or around E16, and we will arrange a time.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Before you book in Canning Town

Do you cover Canning Town?

Yes. Send the postcode and we will arrange a survey in Canning Town. We also cover nearby Stratford (London), Bow and Canary Wharf.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

Do you repair shutters fitted by other companies?

Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.

What details help you quote quickly?

The postcode, the approximate width and height of the opening, whether you want manual or electric operation, and a photo of the frontage.

Other services in Canning Town

See everything we do in Canning Town, across Greater London, or read about industrial roller shutter doors.

Get a fixed price in Canning Town

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248