Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Herne Bay

From the CT6 postcode district outwards, we cover Herne Bay for industrial roller shutter doors, with planning and power checked at survey.

In Herne Bay, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • CT6 and nearby
  • Kent
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Choosing industrial roller shutter doors for premises in Herne Bay

Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Safety edges, photocells and light curtains protect people and forklifts passing under the door.

Wicket doors and vision panels let staff walk through or see outside without opening the full door. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Specification options

  • Wicket doors and vision panels
  • Push-button, pull-cord, loop or remote control
  • Single or three-phase drives
  • Guide guards and bollards against impact
  • Safety edges, photocells and light curtains
  • Direct-drive and chain motors for heavy use
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Herne Bay

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Where we work around Herne Bay

We cover Herne Bay and the surrounding CT6 district as part of our work across Kent. Herne Bay is around 27 miles from Maidstone, and we also cover nearby Whitstable, Canterbury and Faversham.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Questions about industrial roller shutter doors in Herne Bay

Do you cover Herne Bay?

Yes. Send the postcode and we will arrange a survey in Herne Bay. We also cover nearby Whitstable, Canterbury and Faversham.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Will you take away my old shutter?

Yes. Removal and disposal of an old shutter is included when we quote for a replacement.

Also available in Herne Bay

See everything we do in Herne Bay, across Kent, or read about industrial roller shutter doors.

Get a fixed price in Herne Bay

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248